IF10
7 - Applications
7.1 Dual level converter
In1
Control 1
= LOW
Control 2
= HIGH
In2
Out1
Out2
RS422 or
HTL 10-30V
HTL 10-30V
or RS422
RS422 or
HTL 10-30V
HTL 10-30V
or RS422
A, /A, B, /B, Z, /Z
A, /A, B, /B, Z, /Z
A, /A, B, /B, Z, /Z
A, /A, B, /B, Z, /Z
Both inputs can be individually set to either symmetric (differential) format
using A, /A, B, /B, 0, /0 channels or to asymmetric (single-ended) format using A,
B, 0 channels only.
Acceptable input levels are RS-422, TTL and HTL 10-30V.
Also the output format can be selected individually for each output.
The outputs always provide all signals including the inverted channels, even
when no inverted signals are applied to the input.
With Control input 1 = LOW (or unconnected) and Control input 2 = HIGH the
signal ways are as shown in the drawing above, featuring two independent level
converters.
7.2 Encoder splitter (dual output)
In1
Control 1
= LOW (n.c.)
Control 2
= LOW (n.c.)
In2
Out1
Out2
RS422 or
HTL 10-30V
HTL 10-30V
or RS422
HTL 10-30V
or RS422
N.C.
A, /A, B, /B, Z, /Z
A, /A, B, /B, Z, / Z
A, /A, B, /B, Z, / Z
Input 1 is used as encoder input and Input 2 remains unconnected. The input
can be set to either symmetric (differential) format using A, /A, B, /B, 0, /0
channels or to asymmetric (single-ended) format using A, B, 0 channels only.
Acceptable input levels are RS-422, TTL and HTL 10-30V.
Also the output standard can be selected individually for each output. The
outputs always provide all signals including the inverted channels, even when
no inverted signals are applied to the input. Control1 and Control2 remain
unconnected in this application.
MAN IF10 I_E 1.1.odt
7 - Applications
24 / 28
