2.When the charger put with battery connect to the power supply, select the NOR TEST mode and
press the MODE key in two seconds in any state, it can enter the TEST NOR mode.
3.When into the NOR TEST mode, you can choose the 300mah/500mah/700mah/1000mah current
through the key CURRENT within eight seconds, the system will lock the selected current after eight
seconds. If you did not make a set in eight seconds, the system will be the 500mah current to charge
automatically(at this time, the selected current is the recognized current of the system, and when
discharging,it will choose the 250mah current automatically ). When selecting the 700mah or
1000mah current to discharge in eight seconds, it will choose the 500mah current automatically.
4.When the battery is charged fully, the system turns to discharge mode automatically which the
discharging current is the default value, and record the discharging data, so as to detect the battery
capacity. When the END appears in the screen, that means the detection mode is finished, The
reference value displays in the LED screen is the actual capacity reference value of the battery.
5.After the capacity detection mode is finished, the charger will charge the battery again with the
selected current parameters, and until charging fully.
USB 5V OUTPUT
1. The USB is only as the 5V mobile output, the output current is 1000mah, when it connect to the
power supply, the USB output is invalid.
2. When the battery is placed into the tank of the charger, the USB 5V output is activated, so that it can
charge the 5V electronic products.
3. There are for battery slots, any one can be the USB output, however, It is better to put the batteries
into two slots.
4. 5V USB output is only valid for the 3.7V lithium battery, invalid for the NI-MH to boost.
Specific parameters
1.DC input voltage:12V/2.0A
2.Lithium battery charging current:300mah/500mah/700mah/1000mah(4.2V)
3.NI-MH charging current:300mah/500mah/700mah/1000mah(1.48V)
4.Rechargeable battery specifications: 18650/26650/14500/AA/AAA
5.Discharging current
：
250mah/500mah
6.USB output: 5V---1000mah
7.Termination mode: Intelligent voltage monitoring
8.Dimensions: 162(length)*96(width)*36(height)mm
Into
FAST TEST
Choose
Current
Battery
Discharging
Charging
Again
Содержание Lii-500
Страница 6: ...Display schematic diagram...