LightwaveRF LW825, Руководство по эксплуатации

Страница: 5 / 8

SETUP:
IMPORTANT: Make sure that the relay is accessible
once installed in order to operate the manual
button for pairing.
Pairing a channel with a LightwaveRF transmitter
1) Press and hold one of the manual buttons (1 to 3) on
the Relay until the corresponding LED starts to flash.
2) Press the ‘on’ or ‘up’ button on the transmitter. The
LED will flash quickly for 2 seconds to indicate a
successful pairing of that channel.
NOTE: Each channel can be paired with up to 6
separate transmitters at any one time.
Unpairing with a LIghtwaveRF transmitter
1) Press and hold the manual button on the Inline
Relay until the LED starts to flash.
2) Press the ‘off’ or ‘down’ button on the transmitter
(the LED will flash quickly for 2 seconds to indicate a
successful unpairing of that device).
Manual button
for channel 1