SETUP:
The functions illustrated here relate to the operation of
ON/OFF receivers such as Single and Double Sockets
and the Plug-in Adapter Sockets, and to dimmable
receivers; for information regarding how to pair the
handset to the relevant receiver(s), please refer to the
setup instructions for that individual device.
Before operation, ensure that the plastic film isolating
the battery is removed (see later battery replacement
diagram for guidance on how to access battery).
NOTE: If the RF range between the transmitter and
receiver is too great to achieve reliable operation, the
LightwaveRF Connect SIGNAL BOOSTER may be used
in conjunction with this product to increase the signal
strength over greater distances.
IMPORTANT: On the Mood Remote there is a slider
labelled ABCD. Sliding between the letters allows you
to pair LightwaveRF devices to separate channels
(A,B,C or D). Which ever position the slider is in when
you pair the remote to the LightwaveRF device it will
be paired to THAT channel. You can then turn your
devices on or off independently using the same set of
on/off keys with the slider in the relevant position. You
can also pair multiple devices to the SAME channel.
Every device that you pair to the remote will become
part of your mood selections regardless of which
channel it is paired to.
OPERATION :
‘ON’ Button - Press once to switch paired devices ‘ON’.
Hold to raise dim level.
‘OFF’ Button - Press once to switch paired devices ‘OFF’.
Hold to lower the dim level.