SETUP:
The functions illustrated here relate to the operation
of ON/OFF receivers such as Single and Double
Sockets and the Plug-in Adapter Sockets, and to
dimmable receivers; for information regarding how
to pair the handset to the relevant receiver(s), please
refer to the setup instructions for that individual
device.
Before operation, ensure that the plastic film
isolating the battery is removed (see later battery
replacement diagram for guidance on how to access
battery).
NOTE: If the RF range between the transmitter and
receiver is too great to achieve reliable operation,
the LightwaveRF Connect SIGNAL BOOSTER may be
used in conjunction with this product to increase the
signal strength over greater distances.
Setting a Mood
To set up a mood:
1. Make sure all of the devices that are to be
incorporated into the mood are paired with the
mood remote (see relevant receiver device
instructions for details of how to do this).
2. Set the desired output status (i.e. ON or OFF) or
dim level of all of the receivers to be incorporated
into the mood – this is how they will appear
when the mood is activated.
3. Hold down the ‘Mood’ button for 5 seconds.
