Lightwave Link Installation Guide
The Lightwave Link requires a
wireless router with a permanent
internet connection in order to
operate. You will also require a WiFi
enabled smartphone, tablet or PC.
1.
Take the ethernet connector cable
(supplied) and connect it to any spare
available LAN port on your wireless
router. Connect the other end of the
cable to the Lightwave Link’s single
port.
2.
Plug in the power supply, and push
the jack plug into the AC connection
on the back of the Lightwave Link. Turn
on the power supply. The green LED on
the Lightwave Link will illuminate to
indicate that the Link has power and is
ready to be set up from the
LightwaveRF smartphone or Web App.
LAN port
typical wireless router