300
444.5
482.6
44.2
444.5
482.6
44.2
444.5
482.6
44.2
300
min. 2
thread left
rack rail
device
mounting ear
rack screw
flat washer
cage nut
WARNING
To prevent injury, the apparatus is recommended to securely attach to the floor/wall or
mount in accordance with the installation instructions. The apparatus shall not be exposed
to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed
on the apparatus. No naked flame sources, such as lighted candles, should be placed on the
apparatus.
WEEE ( Waste Electrical & Electronic Equipment )
Correct Disposal of This Product
This marking shown on the product or its literature, indicates that it
should not be disposed with other household wastes at the end of its
working life. To prevent possible harm to the environment or human
health from, uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased, this product,
or their local government office, for details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for
disposal.
Class I Apparatus Construction
This equipment must be used with a mains power system with a protective earth connection.
The third (earth) pin is a safety feature, do not bypass or disable it. The equipment should be
operated only from the power source indicated on the product.
To disconnect the equipment safely from power, remove the power cord from the rear of the
equipment, or from the power source. The mains plug is used as the disconnect device, the
disconnect device shall remain readily operable. There are no user-serviceable parts inside of
the unit. Removal of the cover will expose dangerous voltages. To avoid personal injury, do not
remove the cover. Do not operate the unit without the cover installed.
The appliance must be safely connected to multimedia systems. Follow instructions described
in this manual.
Ventilation
For the correct ventilation and avoid overheating ensure enough free space around the
appliance. Do not cover the appliance, let the ventilation holes free and never block or bypass
the ventilators (if any).
Important Safety Instructions
Please read and keep the information in the attached safety instructions supplied with the
product before starting using the device.
Safety Symbols Legend
Symbol Description
Alternating current
Protective conductor terminal
Caution, possibility of electric shock
Caution
Laser radiation
Mechanical Drawings
The OPTJ Power tray NTQ model can be seen in the figures but the layout of all three models
is the same. The dimensions are in mm.
Front View (1:6)
Rear View (1:6)
Side View (1:6)
Top View (1:6)
Mounting with Rack Ears
The rack ears allow mounting the device as a standard rack unit installation.
Always use all the four screws for fixing the
device ears to the rack rail. Choose properly
sized screws for mounting. Keep minimum two
threads left after the nut screw.
The device is rack-size width and 1U high.
Ventilation
To ensure the correct ventilation and avoid
overheating let enough free space around the
appliance. Do not cover the appliance, let the
ventilation holes free on the front and the right
side.
Typical Application
HDMI 2.0 optical matrix assembly: by connecting the HDMI connectors outputs of the fully populated Power tray with the input and output ports of an
MX2-8x8-HDMI20-Audio-L
matrix a
HDMI 2.0 optical matrix system can be created with Full 4K UHD at 60 Hz 4:4:4 maximum resolution.
Specifications
General
Compliance
................................................................................................................
CE
EMC compliance (emission)
..................................................................EN 55032:2015
EMC compliance (immunity)
.................................................................EN 55035:2017
Safety ................................................................................................. EN 62368-1:2014
RoHS .....................................................................................................EN 50581:2012
Laser safety ....................................................................................... EN 60825-1:2008
Laser class specification
..............
Class 1 if HDMI20-OPTJ-90 extenders are installed
Warranty .............................................................................................................3 years
Operating temperature ......................................................
0 to +50°C (+32 to +122°F)
Operating humidity .........................................................10% to 90%, non-condensing
Cooling
............................................................................................................... Passive
Protection against ......................................................................Short circuit / Overload
Enclosure
Rack mountable ........................................................................................................Yes
Material .........................................................................................................1 mm steel
Dimensions (mm / inch)
..........................
482.6W x 300D x 44.2H / 19W x 11.8D x 1.7
Net Weight ............................................................................................ 4.13 kg / 9.1 lbs
Power
Power supply ......................................................................................................Internal
Power source ............................................................................
100-240 V AC 50/60 Hz
Power consumption (loaded with 16 extenders)
................................................ 23.7 W
Optical connectors - OPTJ Power tray SC
Connector type
............................................................................
SC duplex receptacle
Number of connectors ..................................................................................................8
Optical connectors - OPTJ Power tray NTD
Connector type
..........................................................
Neutrik NO2-4FWD-A receptacle
Number of connectors ..................................................................................................4
Optical connectors - OPTJ Power tray NTQ
Connector type
.............................................................
Neutrik NO4FWD-A receptacle
Number of connectors ..................................................................................................4
USB connectors
Connector type
..........................................................................
USB Type A receptacle
Number of connectors ................................................................................................16
DC output voltage
.......................................................................................................
5V
Installation of the OPTJ Extenders for the OPTJ Power tray NTD
The OPTJ Power tray NTD model is built with 4x Neutrik opticalCON DUO connectors which can extend up to 8x optical signals.
The OPTJ Power tray NTD model is able to handle up to 8 pcs HDMI20-OPTJ-TX/RX90 extenders.
The mounting slots (highlighted with green) and the Neutrik opticalCON DUO connectors (highlighted with blue) are labeled with the same ID for the better identification. Thus, the installation of
the extenders are recommended to the following slots in the NTD model:
Mounting slots
1A (1)
1B (2)
1a (3)
1b (4)
2A (5)
2B (6)
2a (7)
2b (8)
3A (9)
3B (10) 3a (11)
3b (12) 4A (13) 4B (14) 4a (15)
4b (16)
Extender
installation