Lightware MX6x6DVI, Руководство пользователя

Страница: 58 / 75

Page 58 / 75
7.5. EDID router commands
7.5.1. Route EDID to the selected input (static)
Description : Copies EDID from location <loc> to input <in>. <loc> must be 1..100.
Format Example
Command {<in>:<loc>}
→ {5:10}
Response (E_SW_OK)CrLf
(E_S_C) CrLf
←
←
(E_SW_OK)CrLf
(E_S_C) CrLf
Explanation: EDID from memory location 10 is copied to input 5.
Note: The router send (E_S_C) only if the new EDID is different from the earlier one.
7.5.2. Route EDID to the selected input (dynamic)
Description : Copies EDID from location <loc> to input <in>. Location <loc> should
be 101...108 (MX8x8DVI, MX8x8DVI-DL) or 101...106 (MX6x6DVI, MX6x6DVI-DL)
as opposed to static routing where <loc> should be between 1..100.
Format Example
Command {<in>:<loc>}
→ {4:102}
Response (E_SW_OK)CrLf
(E_S_C) CrLf
←
←
(E_SW_OK)CrLf
(E_S_C) CrLf
Info: Outputs 1..8 are mapped to logical addresses 101..108.
Explanation: EDID from output 2 is copied to input 4.
After choosing dynamic EDID routing to one (or all inputs) the router will follow the
EDID changes occurring on the output it was connected to. Every time a different
EDID is recognized on the output, it is copied instantly to the input.
7.5.3. Route one EDID to all inputs
Description : Copies EDID from the selected location <loc> to all inputs.
Format Example
Command {A:<loc>}
→ {A:48}
Response (E_SW_OK)CrLf
(E_S_C) CrLf
←
←
(E_SW_OK)CrLf
(E_S_C) CrLf
Explanation: EDID from memory location 48 is copied to all inputs.
7.5.4. View EDID switch status on all inputs
Description : Indexes show the actual input and the number at the given index
(<in1>..<inN>) shows which EDID is switched to that particular input where N
represents the maximal input number of the given configuration.
Format Example 1 (MX8x8)
Command {VEDID}
→ {VEDID}
Response (VEDID
●<IN1>●<IN2>●
<IN3>
●<IN4>●<IN5>●
<IN6>
●<IN7> ●<IN8>)CrLf
←
(
VEDID 048 048 053 101
101 101 101 101)CrLf
Legend: Any <INx> indexes are three digit numbers showing the current EDID
that is routed to the corresponding input. Respond length depends on input number
of the router.