Lightware MX2M-FR24R Скачать руководство пользователя страница 29

Страница: 29 / 126

4. Installation

Hybrid Modular Matrix Switcher series – User's Manual

Applied firmware package: v1.0.0 | LDC software: v2.4.0b3

4.1.

Mounting Options

WARNING!

For the correct ventilation and to avoid overheating ensure enough free space around the

appliance. Do not cover the appliance, let the ventilation holes free and never block or bypass the fans.

INFO:

The dimensions of the frame can be found in the

Mechanical Drawings

section.

Fixing the Handles

Two handles can be mounted on the rack ears of the matrix switcher. The handles are supplied to the

product.
Fasten the

2x 2 pcs M5 flat head fixing screws

to fix the handles to the rack ears.

Fixing the handles to the rack ears of the matrix

Standard Rack Installation

Two rack ears are supplied with the product, which are fixed on left and right side as shown in the picture.

The default position allows mounting the device as a standard rack unit installation.

Standard rack cabinet installation

ATTENTION!

Always use all the four screws for fixing the rack

shelf ears to the rack rail. Choose properly sized screws for

mounting. Keep minimum two thread left after the nut screw.



 



Содержание MX2M-FR24R































































































































Результаты поиска

Содержание MX2M-FR24R

Отзывы:

Бренды по названию

Популярные бренды

Lightware MX2M-FR24R, Руководство пользователя

Результаты поиска

Содержание MX2M-FR24R

Отзывы:

Бренды по названию

Популярные бренды