1. Introduction
UMX-HDMI-140 series– User's Manual
10
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
1.5.
Typical Applications
The typical application of the UMX-HDMI-140 switcher:
▪
Small meeting rooms
▪
Huddle rooms
▪
Home cinema
The following drawings introduce three simple examples how you can apply the device in different
environments.
Huddle Room with Speakers
The Concept
The huddle room has an HD Display and dedicated audio sink devices. The UMX-HDMI-140 switcher is
assembled under the desk in an
Under-desk Double Mounting Kit
. The cables for the input sources are guided
below the desk's surface to a cable box. The visitors of the huddle room can use their laptops built with VGA,
HDMI, DVI, DisplayPort, or Thunderbolt connectors as well. The device also accepts analog audio signals
from two different sources. You can see all accepted interfaces of the device in the
section.
UMX-HDMI-140 transmits HDMI audio/video signal toward the sink devices. The Lightware HDMI-4K
De-embedder de-embeds the audio signal and transmits it to the Active speakers. The De-embedder does not
need local powering because it can be supplied via the HDMI cable by the source and the cable extensions
can be up to 20 meters thanks to the built-in
technology of the Lightware devices.
The Switcher and also the De-embedder can be controlled easily via LAN network using our controller
software (LDC); see the details in the
Software Control - Lightware Device Controller
The HD Display can be also controlled via the UMX-HDMI-140 by RS-232 interface.
To order Lightware HDMI-4K De-embedder device please contact
.
