Lightstar LUXED Series, Руководство пользователя

Страница: 16 / 20

13
DMX Control
There are two kinds of DMX signal control: Wireless DMX and DMX. By
default, DMX is selected. There are 5-Pin XLR In- & Outputs on the console
for DMX via cable. For wireless DMX, there is an antenna mounted on the
side of the ballast.
DMX512 Data Pinout is as followed:
Pin 1 Data Link Common GND
Pin 2 Signal GND
Pin 3
Pin 4 not used
Pin 5 not used
On menu screen, select DMX to adjust DMX settings. By turning the ad-
justment knob, you can select the start address from 1 - 512.
Push Button A/B to select the DMX mode. You can choose between Wall,
Rank, Individual and Controller.
DMX Add
DMX Mode
DMX Switch
DMX SETUP
Figure 1 - DMX Setup Screen
Wall
Rank
Individual
DMX Mode
Figure 2 - DMX Mode Screen
Controller
DMX Mode
Figure 3 - DMX Mode Screen
001