26
Pairing Topcat to Media Connector
SE
T-
U
P
&
DA
IL
Y
OP
ER
AT
ION
FLEXMIKE
From a powered off state, point
the IR transmitter lens toward
the Topcat (for Sharemike, the
transmitter lens is located on
the back of the microphone).
1
Press and hold the Flexmike
power button for 5 seconds until
the mic 1 and mic 2 lights start
flashing, then release the button.
At this point, the status light on
Topcat will blink for 30 seconds.
If after 30 seconds the status light
blinks rapidly, you will need to
start the pairing process again.
2
With the Media Connector
powered off, press and hold
the power button to put it into
pairing mode.
When the status lights are solid
on both Topcat and Media
Connector, pairing is successful.
3
Audio
Input
Audio
Output
Tone
Level
Push
Status
Power
Media Connector
STATUS LIGHT
STATUS LIGHT
TOPCAT
MEDIA CONNECTOR
MIC 2
MIC 1
POWER
IR TRANSMITTER
(Optional)
Your system is shipped with microphones and base units pre-paired for quick and easy use.
If, for any reason, you need to pair new components, follow this pairing process:
