STANDARD REGISTRATION
REPLACING A FLEXMIKE (NO OTHER REGISTERED COMPONENTS IN PLACE)
Note:
Multimike systems do not use MIC 2 status lights.
For users replacing a lost or malfunctioning Flexmike.
1.
Start with the Multimike plugged in and powered on.
2.
If replacing a Flexmike, make sure the malfunctioning Flexmike is powered off.
3.
Power on the new Flexmike. Both microphone 1 and 2 blue lights should start
blinking.
4.
Open the Flexmike battery compartment and pull the battery out (leaving it
plugged in) to reveal the registration button.
7.
After several seconds, the #1 light on the Multimike will turn solid and the
#1 light on Flexmike will remain blinking, then turn solid.
8.
The registration is complete. You can begin speaking into the new
Flexmike to verify there is audio.
9.
Place system ID number (attached to Multimike Quickstart Guide) on the
new Flexmike.
Power On
Blinking lights
(NEW Flexmike)
5.
Using a paperclip with the end straightened out, briefly press the registration button on the back of the Multimike. The 1 and 2
lights will begin blinking on the Multimike.
6.
Briefly press the registration button on the Flexmike. The 1 and 2 lights will start blinking alternately.
NOTE:
if at any point, the Multimike or Flexmike lights begin blinking
rapidly, that indicates a registration error. Turn the new Flexmike off and
repeat steps 4-9.
REGISTER
USB POWER
5V/0.2A
+ –
AUDIO IN
BAL. AUDIO OUT
AUDIO OUT
MIC LINE
AUDIO OUT/DC IN
Registration
Button
SYS
TEM ID#
SYS
TEM ID#
SYS
TEM ID#
SYS
TEM ID#
SYS
TEM ID#
RETAIN EXTRA LABELS IN THE EVENT A COMPONENT IS REPLACED OR ADDED.
Ma
tch components
to this system ID#
Apply to system components to indicate which parts are registered
as a system. Keep registered items together when storing away.
Registration ID Labels
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
00-01
334-0162-02-00-01
10101
MULTIMIKE REGISTRATION GUIDE
AUDIO IN
MICROPHONE
TONE
POWER
MIN
1
MAX
MIN
MAX
TREBLE
BASS
2
Blinking lights
AUDIO IN
MICROPHONE
TONE
POWER
MIN
1
MAX
MIN
MAX
TREBLE
BASS
2
Solid lights
REGISTER
USB POWER
5V/0.2A
+
AUDIO IN
BAL. AUDIO OUT
AUDIO OUT
MIC LINE
AUDIO OUT/DC IN
USB POWER
5V/1.5A
