For complete system operating instructions, go to
www.lightspeed-tek.com/ACT-usermanual
(or scan the 2D barcode).
DAILY OPERATION
CON’T
4.
Using the Activate mobile app:
(Refer to the app tutorial for instructions)
Function
Command
Description
Whole Class
Instruction
Press class
button
Activates classroom speaker to distribute
teacher’s voice to the entire room.
Small Group
Instruction
Press Pod #
Connect to each individual student group
pod. The pod # button will light and a tone
will sound in the earbud when connected
(1-2 seconds).
Just Listen
Press MUTE
Mute your microphone and move from
pod to pod to monitor (listen only) student
groups, gaining critical insights to the
learning process.
Pod to Class
Sharing
Swipe Pod # to class
button
Allows one student group to address the
whole class. Both the class and pod # buttons
will turn orange.
Disconnect
Press activated pod
# again
Disconnects the transmission and turns any
audio off.
Teacher earbud
volume
Press Vol UP/DOWN
arrows
Turns the volume to the teacher’s earbud up
or down.
Recording
Tap the record tab
Select video, audio, or photo to capture. Tap
the record button to begin.
Recording audio
source
Swipe right to reveal
control arc
Tap the desired audio source: class for
teacher microphone only, or any pod to
capture student group interaction.
5. Pod call button:
•
Each pod has a call button for students when they need assistance.
•
When the button is pressed, a tone sounds in the teacher earbud and the
corresponding pod # will blink on the app.
•
The light will continue to blink until the teacher selects that pod.
•
To clear multiple blinking lights: press class button.
•
If undesirable, this feature can be turned off in the app settings.
6. Return the components to the Activate Station for nightly recharging:
•
Place all components in their respective charging slots
•
Charging lights will light: red = charging; green = fully charged.
•
The units will fully charge overnight.
