background image

29

1.

 Overview

2.

 Setup & Use

3.

 Optional 

 

Accessories

4.

 T

roubleshooting

5.

 W

arr

anty

, Safety 

 

& Specifica

tions

normal wear.

5. Warranty is void when equipment 

is subjected to adverse 
temperature, humidity, moisture, 
or other conditions that are not 
considered normal environmental 
conditions.

6. This warranty excludes all 

damages or defects caused 
by shipping, transporting, or 
inadequate packaging for 
shipping.

7. Prepaid shipping label provided 

by Lightspeed for warranty repair 
within the U.S. 

Customers in 

Canada should contact their local 
reseller for service needs.

The warranty period for each system 

and component type is listed below:

DELTA PA: Two (2) years from the 

date of original purchase.

RF Wireless Transmitters and 

Receivers: Two (2) years from the 

date of purchase.

NiMH Batteries: One (1) year from 

the date of purchase.

Microphones and Cases: One (1) 

year from date of purchase.

Products will be replaced or repaired 

at Lightspeed Technologies’ option 

during the warranty period.

Lightspeed Classroom Audio 

Systems are guaranteed against 

malfunction due to defects in 

materials and workmanship for a 

period of TWO (2) YEARS, beginning 

at the date of the purchase invoice. If 

such malfunction occurs, the product 

will be repaired or replaced (at 

Lightspeed’s option) without charge 

during the warranty period, subject 

to the following conditions:

1. The product must have been 

purchased from an authorized 
Lightspeed Technologies Dealer 
or representative. 

2. Lightspeed Technologies must 

perform all warranty service. 
Any service performed without 
the authorization of Lightspeed 
Technologies will void the entire 
warranty.

3. This warranty does not cover any 

product that has been subjected 
to negligent use, connection 
to improper power source, 
misuse, or operated beyond its 
manufactured specifications and 
limits, or has not been reasonably 
maintained.

4. Warranty shall not apply to 

alkaline or NiMH batteries, 
exterior finish, AC power cords, 
bulbs, or any other failings due to 

For warranty service, please contact Lightspeed Customer Service Department 

to obtain return authorization approval and an RA number.
Our Service Department (800.732.8999, 5 a.m. – 5 p.m., PST)  

will handle your repair/replacement needs. 

Customers in Canada should contact 

their local reseller.

SECTION 5: 

 

WARRANTY, SAFETY & 

SPECIFICATIONS

Содержание DELTA PA


































Отзывы: