background image

42

5. W

arranty & 

Specifications

2. Daily Operarion

1. Overview

3. Optional 

 

Accessories

4. T

roubleshooting

DECLARATION OF CONFORMITY

ACCORDING TO EC LVD DIRECTIVE 2006/42/EC

Manufacturer:  

Lightspeed Technologies,lnc.

Address:  

11509 SW Herman Rd,

 

Tualatin, Oregon 97062

We Herewith declare, that the following system complies with the appropriate basic safety and health 
requirements of the Directive based on its design and type, as brought into circulation by us. ln case of 
alteration of the system, not agreed upon by us, this declaration will lose its validity.

Product: 8xx SERIES

Model Number(s): LES-820IR and 820

Conforms to the following EU Directives and the standards stated:

 

Low Voltage Directive: 73/23/EEC and amendments; UL/lEC 60065

 

EMC Directives:   89/336/EEC, 92/31/EEC, 93/68/EEC, 2004/108/EC, 

 

EN 61000-6-3/2001;

 

EN 55024/1998 + A1/2001 + A2/2003,  EN 61000-3 & -4 - Generic Immunity Standard

 

CISPR 22, Class B - Radiated and Conducted Emissions from Audio Equipment

   

  

 

 

Including:  EN 55022/1998 + A1/2000 + A2/2003

 

   

EN 61000-3-2/2000

 

   

EN 61000-3-3/1995 + A1/2001   

 

 

   

IEC 61000-4-2:2001 

 

   

IEC 61000-4-3:2002 + A1/2002  

 

   

IEC 61000-4-4:1995 + A1/2000 + A2/2001

 

   

IEC 61000-4-5:2001

 

   

IEC 61000-4-6:1996 + A1/2001

 

   

IEC 61000-4-8:2001

 

   

IEC 61000-4-11:2001 

The Technical Construction File is available to proper authorities and the product is CE marked.

Содержание Cat 885

















































Отзывы: