Lightspeed 800IX, Руководство пользователя

Страница: 21 / 48

8 0 0 i X U s e r M a n u a l
800iX User Manual | 16
3. Slip the REDMIKE with lanyard around the neck
and position the top of the microphone just below
the collarbone.
NOTE:
Positioning of the REDMIKE is
critical for proper volume adjustment.
4.
While
speaking in a normal voice
slowly increase the volume of the
corresponding channel on the 800iX
until your voice is barely audible.
REMEMBER: This equipment
supplements the user’s voice so they are able to speak in a conversational tone.
Having the volume set too high will result in feedback and listener fatigue.
INITIAL SET-UP OF REDMIKE
5. If a second REDMIKE was purchased, repeat
steps 2-4.
1. Turn the 800iX power switch to the
ON position. The RED LED on the
switch will glow.
2. Turn on the REDMIKE. The RED IR LED on the
800iX will light to indicate a signal is being
received.
NOTE:
Each REDMIKE
has its channel pre-set to
either A or B, as indicated
on the back of the Mic.