background image

40

1. Overview

2. Setup & Use

3. Optional 

 

Accessories

4. T

roubleshooting

5. W

arranty

, Safety 

 

& Specifications

FIVE-YEAR LIMITED WARRANTY

Our Service Department (800.732.8999, 5 a.m. – 5 p.m., PST) will handle all your 
repair/replacement needs.

SECTION 5: 

 

WARRANTY, SAFETY & 
SPECIFICATIONS

Lightspeed Classroom Audio Systems are guaranteed against malfunction due to 

defects in materials and workmanship for a period of FIVE (5) YEARS, beginning 
at the date of the purchase invoice. If such malfunction occurs, the product 
will be repaired or replaced (at Lightspeed’s option) without charge during the 
warranty period.  

Lightspeed’s Warranty Exchange Program applies to all infrared systems within the 

five (5) year warranty period. If an infrared product or component has an issue 
that requires service, a refurbished replacement will immediately be sent to the 
customer to minimize downtime. Customers will receive the exchange product(s) 
or component(s) within 2-3 days. A prepaid return label will be included with 
exchanged products so original malfunctioned equipment can be returned to 
Lightspeed. Any exchanged equipment will remain covered under the original 
five (5) year warranty.  

1.  Warranty on infrared microphones is FIVE (5) YEARS. 
2.  Warranty on Lightspeed NiMH rechargeable batteries is one (1) year. 
3.  Prepaid shipping label provided by Lightspeed for warranty repairs within the 

U.S. Customers outside the U.S. should refer to the Lightspeed website (www.
lightspeed-tek.com) for warranty repair instructions. 

4.  Warranty does not extend to finish, appearance items, or malfunctions due 

to abuse or operation other than specified conditions, nor does it extend to 
incidental or consequential damages. Repair by other than Lightspeed or its 
authorized service agencies will void this guarantee. Information on authorized 
service agencies is available from Lightspeed Technologies, Inc.

Содержание Cat 855














































Отзывы: