LIGHTSIDE LED OCTOPUS, Руководство пользователя

Страница: 2 / 8

INTRODUCTION
Thank you for purchasing this LIGHTSIDE LED OCTOPUS For safety and regular operation
of this product, please read this manual carefully before using and
operating it.
UNPACKING
Open the package and go through the light to see if any damage caused on the way of
transportation. Before turning it on, be sure that the mains voltage within the scope
manual shows.
OPERATION
1.- Make sure the input power is complied with rated voltage, and then turn on it
2.- When not used, turn off light to extend the working time
ADDITIONAL SAFETY INFORMATION
Please be sure to turn off the light before installation and maintenance
Please be sure when operating the light you have good ventilation
This light is design for indoor use. Please keep it dry whenever using.
Do not use other voltage that not complied with the instruction showed
Do not stare at the lighting source, it may damage you eyes
Do not operates unless there is stable voltage
Do not uses it in a moist environment
FUNCTION MODEL SETTING
This unit applies to Switch-address code, which is the choice of the mode of the
performing control and the address-code, the 10th address-code is the switch of the
transferring of the DMX-512 signal control, music control and automatic control. The
mode set, details as following:
ENGLISH
1
Model DIP SWITCH NO.
1 DMX-512 Model
1~9 OFF
、
10 ON
2 Musical Model 1.2.3.4.5.6.7.8.10OFF,9 ON
3 Automatic Model 1~10 OFF