LIGHTSIDE LED MINI BEAM MK2, Руководство пользователя

Страница: 2 / 8

INTRODUCTION
Thank you for purchasing this LIGHTSIDE LED MINI BEAM MK2. For safety and regular
operation of this product, please read this manual carefully before using and
operating it.
UNPACKING
Open the package and go through the light to see if any damage caused on the way of
transportation. Before turning it on, be sure that the mains voltage within the scope
manual shows otherwise you can greatly reduce the lifespan of the LEDs. Any miss use
or damage will avoid our warranty.
OPERATION
1.- Make sure the input power is complied with rated voltage, and then turn on it
2.- When not used, turn off light to extend the working time
ADDITIONAL SAFETY INFORMATION
Please be sure to turn off the light before installation and maintenance
Please be sure when operating the light you have good ventilation
This light is design for indoor use. Please keep it dry whenever using.
Do not use other voltage that not complied with the instruction showed
Do not stare at the lighting source, it may damage you eyes
Do not operates unless there is stable voltage
Do not uses it in a moist environment
SPECIFICATIONS
Input power: AC220-240v, 50-60Hz
Light Source: 10w 4in1 RGBW CREE LED
Consumption 30w
11/13CH DMX
Strobe 1/25Hz
Dimmer 0/100%
Dimensions: 125 x 120 x 150mm
Weight: 2Kg
ENGLISH
1
MINI BEAM Mk2