LIGHTSIDE LED DUAL-T, Руководство пользователя

Страница: 2 / 8

ENGLISH
SAFETY INSTRUCTIONS
Safety Instructions
Please read these instructions carefully, they include important information about the
installation, usage and maintenance of this product.
• Please keep this User Guide for future reference. If you sell the unit to another user, be
sure that he also receives this instruction booklet.
• Always make sure that you are connecting to the proper voltage, and that the line
voltage you are connecting to is not higher than that stated on the bottom of the fixture.
• This product is intended for indoor use only! It must be connected to an earthed mains
outlet
• To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there
are no flammable materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least 20in (50cm)
from adjacent surfaces. Be sure that no ventilation slots are blocked.
• Always disconnect from power source before servicing or replacing fuse and be sure to
replace with same fuse size and type.
• Maximum ambient temperature (Ta) is 104° F (40°C). Don’t operate the fixture at higher
temperatures.
• In the event of a serious operating problem, stop using the unit immediately. Never try
to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage
or malfunction. Please contact the nearest authorized technical assistance center. Always
use the same type of spare parts.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Avoid direct eye exposure to the light source while it is on.
INSTALLATION
The unit should be mounted via its screw holes on the bracket. Always ensure that the
unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the
structure to which you are attaching the unit is secure and is able to support a weight of
10 times of the unit’s weight. Also always use a safety cable that can hold 12 times of the
weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is
out of the touch of people and has no one pass by or under it.
LED
DUAL-T
1