Lights Alive FireFly FF-301 Скачать руководство пользователя страница 2

   

LEFT   LEVEL   

The   left   level   sets   the   sensitivity   of   that   lightning   channel.   If   it   is   set   too   low,   
sound   will   not   trigger   “lightning”.   If   it   is   set   too   high,   the   lights   will   be   on   

constantly   during   most   “lightning   strikes”.   The   range   of   this   control   is   0-­‐25.   
The   factory   default   setting   is   15.   
   

RIGHT   LEVEL   

The   right   level   is   identical   to   the   above,   except   it   adjusts   the   right   channel.   
   

DIMMER   DEPTH   (SENSITIVITY)   

The   dimmer   depth   adjusts   when   and   how   deeply   the   dimmer   channel   will   

dim   connected   lights   during   hard   “lightning   strikes”.   Like   the   lightning   
channels,   the   range   is   0-­‐25   with   a   factory   default   of   15.   
   

STROBE   SENSITIVITY   

Your   FF-­‐301   can   control   most   professional   strobes   via   a   low   voltage   strobe   
control   channel.   The   stronger   the   “lightning   strike”,   the   faster   the   strobe   will   

fire.   This   adjustment   allows   you   to   set   the   response   per   your   personal   
preference.   Like   all   other   sensitivity   settings,   the   range   is   1-­‐25   with   a   factory   

default   of   15.   
   

LEFT   THRESHOLD   

Threshold   settings   adjust   the   minimum   voltage   applied   to   your   lights   at   all   
times.   Proper   adjustment   increases   the   sensitivity   and   range   of   lights   

connected   to   your   FF-­‐301.   Adjustment   is   achieved   by   increasing   the   setting   
until   your   lights   just   begin   to   glow,   then   reducing   the   setting   until   they   go   
out.   This   is   a   critical   adjustment   with   a   range   of   0-­‐50.   Factory   default   is   4,   but   

the   number   may   be   considerably   higher,   depending   on   your   lights.      
   

RIGHT   THRESHOLD   

Same   as   above,   except   that   it   adjusts   the   right   channel.      
   

MAXIMUM   DIMMER   LEVEL   

This   setting   adjusts   the   maximum   brightness   of   the   dimmer   channel.   The   
range   is   1-­‐20   with   a   factory   default   of   10.   

   

AUDIO   SOURCE   

Audio   source   options   include   LOOP,   TRIGGERED,   EXTERNAL   and   NONE.   
LOOP   will   provide   an   uninterrupted   audio   loop,   thus   providing   continuous   
lightning.   TRIGGERED   allows   the   use   of   any   Lights   Alive   Mantis   Sensor   or   

most   third-­‐party   sensors.   Once   triggered,   the   301   will   provide   lightning   for   
forty   (40)   seconds,   then   it   resets   and   waits   for   the   next   trigger.   EXTERNAL   
allows   you   to   connect   your   own   audio   source.   NONE   silences   the   audio   and   

stops   the   lightning.      
   

Отзывы: