Page
2
of
6
TL - 4008 MEMORY CONTROL CONSOLE
Revision 1.4
OWNERS MANUAL
02/17/2005
www.lightronics.com
Lightronics
Inc.
509
Central
Drive
Virginia
Beach,
VA
23454
757
486
3588
SPECIFICATIONS
Number of channels 16 or 8 depending on mode
Operating modes
8 channels x 2 manual scenes
16
channels
x
1
manual
scene
8
channels
and
8
recorded
scenes
Scene memory
8 scenes total
Chase 2
programmable
40
step
chases
Control
protocol
LMX-128
(multiplex)
USITT
DMX-512
is
optional
Output connector
3 pin female XLR connector
5
pin
female
XLR
for
DMX-512
Compatibility
Multiplex
protocol
compatible
with other multiplex systems
Power
input
13VAC
or
+15VDC
Optional
external
power
supply
Dimensions
10.25"W X 9.25"D X 2.5"H
Weight 4.4
Pounds
Other features of the TL-4008 include: grand master fader, split dipless crossfader, momentary "bump" buttons,
and blackout control. Two 40 step chases may be run simultaneously for complex patterns. Chase rate is set by
tapping the rate button at the desired rate. Scenes and chases stored in the unit are not lost when the unit is
turned off.
INSTALLATION
The TL-4008 control console should be kept away from moisture and direct sources of heat.
LMX CONNECTIONS: Connect the unit to a Lightronics (or compatible) dimmer using a multiplex control cable
with 3 pin XLR connectors. The TL-4008 is powered by the dimmer which it is connected to. It may also be
powered via an optional external power supply. The unit will operate with dimmers in both the NSI/SUNN and
Lightronics modes. All dimmers connected to the unit MUST be in the SAME mode.
DMX CONNECTIONS: Connect the unit to a DMX dimmer using a control cable with 5 pin XLR connectors. The
DMX-512 connection does NOT provide console power therefore an external power supply (provided with units
having DMX option) must be used.
DMX-512 Connector Wiring
(5 PIN FEMALE XLR)
LMX-128 Connector Wiring
(3 PIN FEMALE XLR)
PIN #
SIGNAL NAME
1 Common
2
DMX data -
3
DMX data +
4 Not
Used
5 Not
Used
PIN #
SIGNAL NAME
1 Common
2
Phantom power from dimmers
No15VDC
3
LMX-128 multiplex signal
CONTROLS AND INDICATORS
X Faders:
Controls individual channel levels for channels 1 – 8.
Y Faders:
Controls level of scenes or individual channels depending on current operating mode.
Cross Faders:
Fades between X and Y row faders.
Bump Buttons:
Activates associated channels at full intensity while pressed.
Chase Select:
Turns chases on and off.
Chase Rate:
Press three or more times at desired rate to set chase speed.
Y Mode Indicators:
Indicate current operating mode of Y faders.
Y Mode Button:
Selects operating mode of Y faders.
Blackout Button:
Turns on and off console output from all scenes, channels, and chases.
Blackout Indicator:
Lighted when blackout is active.
Grand Master:
Adjusts output level of all console functions.
Record Button:
Records scenes and chase patterns.
Record Indicator:
Flashes when chase or scene recording is active.
