![background image](http://html1.mh-extra.com/html/lightronics/tl-112/tl-112_owners-manual_1914918005.webp)
OWNERS MANUAL
Page 5 of 5
TL - 112 MEMORY CONSOLE
Revision
1.0
05/12/2002
www.lightronics.com
Lightronics
Inc.
509
Central
Drive
Virginia
Beach,
VA
23453
TEL
757
486
3588
AUDIO DRIVEN CHASE
Chase rate may be controlled by an internally mounted microphone. Rotate the “AUDIO” control clockwise to
increase the sensitivity of the microphone. This control is disabled when turned fully counterclockwise.
MAINTENANCE AND REPAIR
TROUBLESHOOTING
Check that the multiplex cable is not defective.
To simplify troubleshooting - set the unit to provide a known set of conditions.
Make sure that the dimmer address switches are set to the desired channels.
OWNER MAINTENANCE
The best way to prolong the life of your TL - 112 is to keep it dry, cool, clean and COVERED when not in use.
The unit exterior may be cleaned using a soft cloth dampened with a mild detergent/water mixture or a mild spray-on
type cleaner. DO NOT SPRAY ANY LIQUID directly on the unit. DO NOT IMMERSE the unit in any liquid or allow
liquid to get into the controls. DO NOT USE any solvent based or abrasive cleaners on the unit.
There are no user serviceable parts in the unit. Service by other than Lightronics authorized agents will void your
warranty.
OPERATING AND MAINTENANCE ASSISTANCE
Dealer and Lightronics Factory personnel can help you with operation or maintenance problems. Please read the
applicable parts of this manual before calling for assistance.
If service is required - contact the dealer from whom you purchased ther unit or contact Lightronics, Service Dept.,
509 Central Drive, Virginia Beach, VA 23454 TEL: (757) 486-3588.
SPECIFICATIONS
Number of channels 12
Operating modes
Two Scene Manual Mode
Preset
Scene
Playback
Mode
Chase
Mode
Scene memory
24 scenes total in 2 banks of 12 scenes each.
Chase 12
programmable
12
step
chases
Control protocol
Multiplexed (optional DMX-512)
Output connector
3 pin mic. XLR connector (5 pin mic. XLR for DMX-512)
Compatibility
Multiplex protocol compatible with other 3 pin multiplexed systems
Power input
18VAC or 15VDC (Optional external power supply)
Power consumption
70ma
Dimensions:
9.25” Wide X 8.5” Deep X 2.25” High
Weight:
4
Pounds