Page 7 of 11
SR516 ARCHITECTURAL CONTROLLER
Version 1.00
OWNERS MANUAL
12/16/2020
www.lightronics.com
Lightronics Inc.
509 Central Drive, Virginia Beach, VA 23454
757 486 3588
Function Code 32 is a master fade time function
which will set ALL fade times to the value entered.
You can use this for a base setting for fade times and
then set individual scenes to other times as needed.
SIMPLE REMOTE SWITCH BEHAVIOR
The SR516 is very versatile in how it can respond to
the simple remote switch inputs. Each switch input
can be set to operate according to its own settings.
Most settings pertain to momentary switch closures.
The MAINTAIN setting allows the use of a regular
ON/OFF switch. When used this way, the applicable
scene(s) will be ON while the switch is closed and
OFF when the switch is open.
Other scenes can still be activated and the OFF button
will turn the MAINTAIN scene OFF.
SETTING SIMPLE SWITCH INPUT OPTIONS
(Function Codes 33 - 35)
After accessing a function as described in
ACCESSING AND SETTING FUNCTIONS:
1. The scene lights including
OFF
(0) and
BANK
(9)
will flash a repeating pattern of the current
setting.
2. Use the scene buttons to enter a value (4 digits).
Use
OFF
for 0 and
BANK A/B
for 9 if needed.
3. Push
REC
to save the new function value.
The function values and description are as follows:
SCENE ON/OFF CONTROL
0101 - 0116 Turn ON Scene (1-16)
0201 - 0216 Turn OFF Scene (1-16)
0301 - 0316 Toggle ON/OFF Scene (1-16)
0401 - 0416 MAINTAIN Scene (1-16)
OTHER SCENE CONTROLS
0001 Ignore this switch input
0002 Blackout - turn off all scenes
0003 Recall last scene(s)
SETTING SYSTEM CONFIGURATION OPTIONS 1
(Function Code 37)
The system configuration options are specific
behaviors which can be turned ON or OFF.
After accessing a function code (37) as described in
ACCESSING AND SETTING FUNCTIONS:
1. The scene lights (1 - 8) will show which options
are on. An ON light means the option is active.
2. Use the scene buttons to toggle the associated
option ON and OFF.
3. Push
REC
to save the new function setting.
The configuration options are as follows:
SCENE 1
SCENE RECORD LOCKOUT
Disables scene recording. Applies to ALL scenes.
SCENE 2
DISABLE BANK BUTTON
Disables the Bank button. All scenes are still available
from smart remotes if they are set to use them.
SCENE 3
SMART REMOTE LOCKOUT VIA DMX
Disables the Smart Remotes if a DMX input signal is
present.
SCENE 4
LOCAL BUTTON LOCKOUT VIA DMX
Disables the SR516 scene buttons if a DMX input
signal is present.
SCENE 5
SIMPLE REMOTE LOCKOUT VIA DMX
Disables the simple remote switches if a DMX input
signal is present.
SCENE 6
TURN ON LAST SCENE AT POWERUP
If a scene was active when the SR516 was powered
off then it will turn on that scene when power is
restored.
SCENE 7 EXCLUSIVE GROUP TOGGLE DISABLE
Disables the ability to turn off all the scenes in an
exclusive group. It forces the last live scenes in the
group to stay on unless you push
OFF
.
SCENE 8
DISABLE FADE INDICATION
Prevents the scene lights from blinking during scene
fade time.
SETTING SYSTEM CONFIGURATION OPTIONS 2
(Function Code 38)
SCENE 1-5 SAVED FOR FUTURE EXPANSION
SCENE 6
MASTER/SLAVE MODE
Changes the SR516 from transmit mode to receive
mode when a master dimmer (ID 00), SC or SR unit is
already in the system.
