LightPro Castor 9 180S, Руководство пользователя

Страница: 8 / 12

Castor 9
User manual
Thank you for purchasing the Lightpro Castor 9.
This document contains the required information for
correct, efficient and safe use of the product. Consult the
user manual of your transformer for more information
about the installation and connection of your lighting
plan or visit our website
www.lightpro.nl
Read the information in this manual carefully before
using the product. Keep this manual near the product for
consultation in the future.
PRODUCT DESCRIPTION
The Lightpro Castor 9 is an LED spot for outdoor use.
The fixture can be mounted on a solid surface or placed
in the ground with the supplied spikes. This product may
only be used as outdoor lighting in combination with
the Lightpro 12-volt system. Any alterations made to the
product may have consequences for the safety, guarantee
and correct functioning of the product and/or other parts
of the system.
SPECIFICATIONS
Product Lightpro Castor 9
Article number 180S
Light source LED 9W AC/DC 12V
Power (max) 9W
Luminous flux (max) 65 - 750 lm
Light colour 3.000K
Average lifetime 25.000
Dimensions (H x B x W) 95 x 60 x 120 mm
Protection class
IP44
Ambient temperature -20 °C to 50 °C
Cable length 1m
Dimmable Yes, with built-in dimmer
Light source Not replaceable
On/off 10.000
PACKAGING CONTENT
[Figure A]
1. Fixture Castor 9
2. Ground spike
3. Screw
4. Plug
5. Alternatieve reflector
6. Hex key (large)
7. Hex key (small)
8. Lightpro connector
Check if all parts are present in the packaging. For
questions about parts, service, and any complaints or
other remarks, you can always contact us.
E-mail:
info@lightpro.nl .
INSTALLATION
Option 1: placement on a fixed underground or mounting
to a wall
[Figure B]
1. Remove the screw from the base using the included
large hex key (Figure A [6]).
2. Remove the fixture from the base.
[Figure C]
• Install the base onto the underground with the included
screw.
If necessary, drill a hole in the underground and use
the included plug.
[Figure D]
1. Place the fixture in the base.
2. Place the screw in the base.
3. Put the fixture in the desired position.
4. Fasten the screw using the included large hex key
(Figure A [6]).
Option 2: placement in the ground
[Figure E]
1. Place the spike underneath the base.
2. Properly fasten the spike.
3. Put the fixture in the desired position.
4. Fasten the screw using the included large hex key
(Figure A [6]).
5. Place the fixture in the ground.
CHANGING REFLECTOR
The pre-installed reflector has a beam angle of 60°. If
desired, it can be replaced by the included
alternative reflector, which has a beam angle of 23°.
[Figure F]
1. Remove the screw from the fixture using the
included small hex key (Figure A [7]).
2. Remove the head from the fixture.
3. Unscrew the reflector.
4. Remove the reflector.
[Figure G]
1. Place the alternative reflector.
2. Fasten the reflector.
3. Place the head in the fitting. Pay attention to the
position of screw hole.
4. Place the screw in the fitting.
5. Fasten the screw using the included small hex key
(Figure A [7]).
DIMMER FUNCTION
The fixture is equipped with a built-in dimmer. The
light output can be set to 6 different levels.
[Figure F]
• Push the button to set the desired light output.