LightPointe AireLink 60, Инструкция по установке и эксплуатации

Страница: 101 / 133

AireLink

60 Installation and User Manual Rev. D CLI -- Command Line Interface
Page 101
Note: See each command for the description message
7.3.1 Interface Commands
Command:
airelink60(config)# interface {data|management}
Description: Configure data and management ports
? Show available command options
management Enter Management port configuration mode
data Enter Data port configuration mode
Example:
airelink60(config)# interface data ?
7.3.1.1 Interface data commands
Command:
airelink60(config)# interface data shutdown {?|enable|disable}
Description: Set network data interface operational status
? Show available command options
enable Enable interface shutdown
disable
Disable interface shutdown
Example:
airelink60(config)# interface data shutdown enable
----------------------------------------------------------------------------------------------------------
Command:
airelink60(config)# interface data autonegotiation {?|enable|disable}
Description: Set network data interface auto-negotiation status
? Show available command options
enable Enable autonegotiation
disable Disable autonegotiation
Example:
airelink60(config)# interface data autonegotiation enable