LIGHTOLIER a GENLYTE company.
631 Airport Road, Fall River, MA 02720
READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE
This fixture is intended for installation in accordance with the National Electrical Code and local regulations.
To assure full compliance with local codes and regulations, check with your local electrical inspector before
installation. To prevent electrical shock, turn off electricity at fuse box before proceeding.
Retain these instructions for maintenance reference.
INSTRUCTIONS FOR LAMPING (Fig. 5 & 6)
1. Remove LOUVER by pulling straight out. (Fig. 5)
2.
WARNING: RISK OF FIRE
Use only T-4 Tungsten – Halogen outside frosted
minican base L A M P, 150 watts maximum. Insert L A M P
into S O C K E T. Turn clockwise until tight. To remove, turn
counterclockwise. (Fig. 6)
3. Replace LOUVER with GLASS LAMP GUARD in place by
pushing straight up until LOUVER is flush with FIXTURE
HOUSING.
INSTRUCTION SHEET NO.
I S : 6 4 2 2 M C
0498
Page 2 of 2
WA R N I N G
: Lamp manufacturers require the
GLASS LAMP GUARD be in place before energizing
L A M P, and that great care should be taken that
LAMP is fully cooled before relamping.
Fig. 5
Fig. 6
HOUSING
GLASS LAMP
GUARD
LOUVER
HOUSING
SOCKET
T-4 LAMP
WARNING
: LIGHT FIXTURE and L A M P get extremely
hot during operation. Allow FIXTURE to cool before
handling.
