Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2011 Philips Group • J0711
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytecaster
®
Recessed Downlighting
2000AICV
Page 1 of 1
3 3/4" Aperture Low Voltage MR16 Insulated Ceiling AirSeal
®
Frame-In Kit
Reflector Trim
Frame-in Kit
Features
1. Housing:
.026” galvanized steel. UL listed for direct contact with thermal
insulation. AirSeal
®
housing minimizes air leakage to less than 2 CFM at 1.57
PSF, which complies with Washington State Model Energy Code (Section
602.3.3) and reduces heat loss and condensation in ceiling. Access door for
inspection of junction box.
2. Mounting Frame:
.036” (#20 ga.) galvanized steel. Accommodates ceilings
up to 1” thick. Four slots are positioned 90° apart to simplify alignment. Push-
in/twist-out rotoclips hold reflector flush to ceiling.
3. Junction Box:
2”X 4” X 4”;.063” (#16 ga.), galvanized steel. UL listed for
maximum of 6 No. 12 ga., 90° C through branch circuit conductors. Quick
release “L” shaped cover for outside access to wiring. Access door inside of
housing allows easy inspection of wiring without removal of housing. Integral
cable clamps permit attachment of nonmetallic Romex
®
or armored cable
without the need for additional connectors.
4. Mounting Bars:
.059 (#16 ga.) galvanized steel. 13” long bars extend to 27”,
rotatable and lockable, with integral T-bar tabs. Attach to wood joist or T-bar
ceiling without need for accessories.
5. Socket Housing:
Aluminum, with lamp adjustment assembly allows 35°
max. vertical, 358° horizontal adjustment.
6. Socket:
Field replaceable. Two pin socket, pre-wired with #18 SF1 leads to
junction box.
7. Thermal Protector:
Mounted inside housing. Meets NEC and
UL requirements.
8. Transformer:
Mounted inside housing, magnetic. 120V pri-mary, nominal 12V
secondary. Removable from below.
Dimming
Dimming Controls: use only dimmers specifically designed for use with magnetic
transformers, like Lightolier Onset
®
Sunrise
®
series LV or VA, dimmers, or any
Lightolier Controls dimming systems. Low voltage fixtures may produce audible
sound when used with dimmers, which may be objectionable in acoustically criti-
cal areas.
Options and Accessories
Mounting Bars:
1976
- 13” set of (4)
Replacement Kit:
Plaster Ceiling Ring:
1959
- 7/8” depth for wet plaster ceilings.
MR 16 Socket Replacement:
1975B
Labels
UL (Type I.C., Suitable for Damp Location), I.B.E.W.
Complies with Washington State Air Leakage Requirements as stated in the
Model Energy Code and the Washington State Energy Code.
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit
Reflector Trims — See Individual Reflector Trim Specification Sheets
Open Downlight
Enclosed
Aperture Cone
Satin Cone Baffles
Slot
Pinhole
Diffuser
2000AICV
2012
2008 2005 2006 2011 2090LV
2012NM
2008NM 2005WH
2013BKNM
2010
2005BNM
2013CD
2010NM 2005NM
2013CDNM
2013NM
2013BK
2013WH
2013
2013WD
2013WDP
Romex
®
is a registered trademark of General Cable Industries Inc.
