Calculite
®
HID Downlight
C9E28VW
Page 1 of 2
9" Aperture, ED28 (Enclosed) Metal Halide, Wide Beam
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Thomas Company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • AO5O4
Reflector Trim
Frame-In Kit
Lamp (Coated)
C9E28VW CLW
Specular Clear, White Painted Flange.
CLP
Specular Clear, Matching Flange.
CCDW
Comfort Clear Diffuse, White Painted Flange.
CCDP
Comfort Clear Diffuse, Matching Flange.
CCZW
Champagne Bronze, White Painted Flange.
CCZP
Champagne Bronze, Matching Flange.
C917MHPSU
Magnetic Pulse Start, 120V/277V
175W ED28, BT28 (Enclosed), PS MH
C925MHPSU
Magnetic Pulse Start, 120V/277V
250W ED28, BT28 (Enclosed), PS MH
C917MHU
Magnetic, 120V/277V
175W ED28, BT28 (Enclosed), MH
C925MHU
Magnetic, 120V/277V
250W ED28, BT28 (Enclosed), MH
Features
1. Upper Reflector:
Clear anodized aluminum, 0.040" (16-ga.). Provides
narrowbeam optics. Also available in narrow and medium beam, see
C9E28VN specification sheets.
2. Aperture Cone:
Specular Clear low iridescence finish. Low brightness with
40° cut-off to lamp and lamp image. Self-flanged with painted white or
aperture matching polished flange. Consult factory for other finishes.
3. Lamp Shield:
High-temperature glass as required by code, captive
during re-lamping.
4. Socket Cup:
Heat dissipating, die-cast aluminum, pre-wired with mogul base
porcelain socket with nickel plated screw shell. Postive locking attachment
without tools to reflector assures proper optical alignment of lamp.
5. Mounting Frame:
0.048" (18-ga.) galvanized steel. Includeds pre-installed
mounting bars.
6. Mounting Ring:
0.048"(18-ga.) galvanized steel. Designed for vertical
adjustment from above or below for ceilings from 0" to 2" thick. Center-line
notches allow consistent alignment of multiple fixtures.
7. Retention Springs:
Rust resistant springs secure cone for quick, tool-less
installation.
8. Frame Vertical Adjustment:
Vertical adjustment mechanism accommodates
mounting to virtually any ceiling system using mounting bars (provided, or 1/2"
EMT tubing (by others). Single locking feature secures all adjustments.
Alignment holes and markings allow fixture to be preset prior to installation.
9. Mounting Bars:
0.048" (18-ga.) pre-installed, telescoping bars extend to 30" long
and lock securely into position. Built-in locking tabs provide positive attachment
to common T-bar systems. Self-centering feature simplifies installation in 24" O.C.
grid systems. Attaches to steel or wood joists without accessories.
10.Ballast Assembly:
Ballast and mounting plate on mounting bars secured
with thumb screw. Ballast assembly is accessible from below without tools
for inspection and replacement.
11. Junction Box:
0.048" (18-ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors. Allows inspection from below.
12. Thermal Protector:
(Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Electrical
Magnetic Ballast:
120/277V dual voltage, 60 Hz., encased and potted, CWA or
Super CWA (pulse start) circuit type, high power factor, sound rating “B” (175W
and 250W PS)/sound rating “C” (others), -20°F minimum starting Temperature,
Type 1 Outdoor rating.
Ballast
ANSI Code
Voltage
Max. Amps
Input Watts
175W PS MH
M137
120/277
2.20/0.90
205
250W PS MH
M138
120/277
2.80/1.20
290
175W MH
M57
120/277
2.00/0.90
205
250W MH
M58
120/277
2.60/1.10
290
Options and Accessories
Auxiliary:
Add suffix
A
to Frame-In Kit and Reflector Trim. See Spec.Sheet ”A“.
Emergency:
Add suffix
E
to Reflector Trim and Frame-In Kit. See Spec. Sheet “E”.
Slope Ceiling Adapters:
See Specification Sheet SCA.
Fuse (magnetic ballast):
Add suffix
F1 or F2
to Frame in Kit (F1=120V, F2=277V).
Chicago Plenum:
Consult Factory.
Labels
UL (Suitable for Damp Locations), CSA, I.B.E.W.
Ceiling Cutout:
10 1/16” (256mm) Dia.
