Lightolier
a Genlyte company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • C0711
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Calculite
®
Evolution Recessed Downlight
C6DAIC
Page 1 of 1
6" Aperture Deep Incandescent 120V IC AirSeal
®
Frame-In Kit
20 3/4"
8
7
6
3
4
2
1
*11 5/8" min. is for
up to 1/2" thick ceiling.
24 1/4"
10 1/4"
12 1/8" max.
11 5/8" min.*
11 1/8"
1" Max. Ceiling Thk.
Adjustment
(mounting bars
included)
13 3/4" to 24"
13 1/2"
18 1/8"
5
Ceiling Cutout: 6 11/16” Dia.
Frame-In Kit
Reflector Trim
C6DAIC
Open
Open
Adjustable Open
Lensed
Downlight
Downlight
Accent
Wall Washer/Downlight
Wall Washer
C6AD C6P38D C6P38A C6AW
C6P38L
100W A19, MB19
120W PAR38
90W PAR38
100W BT15, MB19
90W PAR38
100W BT15
200W A21
200W A21
Features
1. Outer Housing:
Raw aluminum 0.036" (18ga.) allows for heat dissipation.
Top and bottom covers, aluminum 0.050" (16 ga.). Top cover removable for
top access.
2. Housing:
Steel, 0.03" (22 ga.). Top Cover: Aluminum, 0.04" (14 ga.). Matte
black finish. AirSeal
®
housing minimizes air leakage to less than 2CFM at
1.57 PSF (or 75pa) in accordance with ASTM E283, which complies with
Model Energy Code and Washington State Energy Code and reduces heat
loss and condensation in ceiling.
3. Mounting Frame:
Die-cast aluminum for dry or plaster ceilings. Locks into
position along length of mounting bars with locking screws.
4. Retaining Springs:
Precision-tooled steel springs secure reflector trim to
mounting frame for quick, tool-less installation.
5. Mounting Bars:
Galvanized steel, 0.06" (16 ga.). Bars pivot for easy
installation and wire-in below ceiling line. Bars extend to accommodate
16" to 24" O.C. joist spacing. Integral self-tapping screws secure to wood
or metal construction. Built-in tabs for locking to T-bars without the need
of accessories.
6. Snap-In Connectors:
Keyed to accept power and socket harnesses
which are provided with reflector trim.
7. Junction Box:
Galvanized steel .063" (14 ga.). UL listed for maximum of
4 No. 12 AWG 90°C through branch circuit conductors. Accessible from
inside and outside of fixture. Outside J-Box door is hinged for maximum
opening. Snap-in plug is provided on inside cover for quick connection to
power harness.
8. Thermal Protector:
Meets NEC and UL requirements.
9. Reflector Trim:
Compatible reflector trims are listed above. See separate
reflector trim specification sheets for complete catalog numbers and
details.
Options & Accessories
Chicago Plenum
Consult Factory
Labels
UL Listed (Type I.C., Suitable for damp locations), I.B.E.W.
Complies with Air Leakage Requirements stated in the Model Energy Code,
Washington State Energy Code and Title 24.
