Lightolier
a Genlyte company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • G0711
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Calculite
®
Evolution Lensed Adjustable Accent
C3MRW
Page 1 of 2
3" Aperture, MR16 (12V)
Spec. Sheet
C3MRW
Features
1. Trim Kit Aperture Cone:
Low brightness; 0.040" aluminum, anodized; keyed
to lamp support assembly for true aiming of lamp to prevent incorrect instal-
lation of cone. Hinged, and snaps on for easy tool-less installation. Capitive
clear glass shield during relaming. Self-flange in painted white or aperture
matching polished flange. Flangeless trim used with Plaster Trim Ring acces-
sory. Interchangeable with other 3" Evolution trims.
2. Trim Kit Vertical Adjustment Mechanism:
Die-cast aluminum. Built-in
aperture shield blocks view into fixture. Provides 0° - 45° vertical tilt up to
1" thick ceiling, less in thicker ceilings; lockable. 30° maximum tilt in ceilings
1.25" - 2" thick. EZ-Aim Helical Drive System provides fast and accurate hot
aiming with Philips screwdriver.
3. Horizontal Adjustment Mechanism:
Die-form steel ring, matte black fin-
ish. Provides 362° horizontal stop, lockable with Philips screwdriver.
4. Lamp Support:
Die-form aluminum with knurled surface for easy gripping
during relamping. Spring tension clips hold lamp and lens and allow fast
snap-in, snap-out relamping. Matte black finish. Accepts up to two 2" diameter
accessories.
5. Cover Glass:
High temperature, soft focus lens.
6. Thick Ceiling Ready Brackets:
Die-form steel, matte black finish. Adjust
trim kit vertically to accommodate up to 2" thick ceiling, lockable.
7. Lampholder:
Procelain bi-pin socket. Pre-wired with No.18 AWG Teflon leads.
8. Frame Vertical Adjustment Mechanism (C3LV):
Accommodates mounting
to virtually any ceiling system using pre-installed mounting bars, or 1/2" EMT
tubing (by others). Single locking features secures all adjustments. Alignment
holes and markings allow fixture to be pre-set prior to installation. Final
adjustment can be made from below inside fixture.
9. Mounting Bars (C3LV):
Galvanized steel, 0.048"; pre-installed telescoping
bars extend from 20" to 30" long and lock securely into position. Built-in lock-
ing tabs provide positive attachment to common T-bar systems. Self-center-
ing feature simplified installation in 24" O.C. grid systems. Attaches to steel
or wood joists without accessories.
10.Transformer:
Replaceable from below. Magnetic: 120V/277V 60 Hz. dual-volt-
age, core & coil.
Note:
Magnetic not recommended for residential or noise
sensitive areas. Electronic: 120V or 277V 50/60 Hz., regulated lamp voltage,
HPF, EMI and circuit protections, thermal auto-reset, quiet operation.
Features (cont.)
11.
Frame-In Kit
: See Frame-In Kit specification sheets for more information.
Non-IC and Non-IC AirSeal - Insulation must be kept 3" away from any parts
of the luminaire and must not be placed above luminaire in a manner which
will entrap heat. IC AirSeal - Luminaire may be in direct contact with thermal
insulation.
Labels
U.L. (Suitable For Wet Locations), I.B.E.W.
*Lamp wattage restriction for Non-IC: 65W for up to 1" thick ceiling, 50W for
ceiling thickness greater than 1” (up to 2”).
Options and Accessories
2” dia. Color Filters/Specialty filters:
See ADF2/AF2 specification sheets
2” Dia. Louver: AL2HC
Plaster Trim Ring (use with flangeless trim):
CA3FMR
Chicago Plenum:
Consult Factory
C3LV
Non-IC
Magnetic 120/277V
42W-65W MR16 (12V)
C3LVE1
Non-IC
Electronic 120V
20W-65W MR16 (12V)
C3LVE2
Non-IC
Electronic 277V
20W-65W MR16 (12V)
C3ALV
Non-IC AirSeal
®
Magnetic 120/277V
42W-65W MR16 (12V)
C3ALVE1
Non-IC AirSeal
®
Electronic 120V
20W-65W MR16 (12V)
C3ALVE2
Non-IC AirSeal
®
Electronic 277V
20W-65W MR16 (12V)
C3AICLV
IC AirSeal
®
Magnetic 120V
20W-50W MR16 (12V)
C3AICLVE1
IC AirSeal
®
Electronic 120V
20W-50W MR16 (12V)
Note:
Magnetic not recommended for residential or noise sensitive areas.
1/2"
(13mm)
2" (59mm) Max.
Ceiling Thk.
2 7/8" (73mm) Dia.
4" (102mm) Dia.
Vertical Adjustment
1" (25mm) to
2 3/4" (70mm)
C3LV
Flangeless Trim with
Plaster Ring Accessory
3 3/8" (86mm) Dia.
9 1/2"
(242mm)
9"
(229mm)
1/2" (13mm)
C3AICLV
11
2 6
1
4
7 3
8
5
10 9
5 1/2"
(140mm)
5"
(127mm)
Plus Ceiling
Thk.
Non-IC:
C3LV
C3LVE1
C3LVE2
Non-IC AirSeal:
C3ALV
C3ALVE1 C3ALVE2
IC AirSeal:
C3AICLV
5" (127mm)
12 5/8"
(321mm)
14 3/8"
(365mm)
9 5/8"
(245mm)
5" (127mm)
14 3/8"
(365mm)
10 1/8"
(257mm)
9" (229mm)
11 3/16"
(284mm)
22 3/8"
(568mm)
14 5/8"
(372mm)
Spec. Sheet
C3MRW
IC AirSeal Frame:
C3AICLV
C3AICLVE1
Non-IC Frame:
C3LV
C3LVE1
C3LVE2
Non-IC AirSeal Frame:
C3ALV
C3ALVE1
C3ALVE2
Ceiling Cutout: 3 1/2” (130mm) Dia.
For Complete Fixture Order: Trim Kit + Frame-In Kit. Each Sold Separately.
Trim Kit
Frame-In Kit
Lamp*
Cone Finish
White Flange
Polished Flange Flangeless
Clear
C3MRW CLW
C3MRW CLP
C3MRWCLFT
Comfort Clear Diffuse
C3MRW CCDW C3MRW CCDP C3MRW CCDFT
Champagne Bronze
C3MRW CCZW C3MRW CCZP C3MRW CCZFT
Gold
C3MRW GDW
C3MRW GDP
C3MRW GDFT
Matte White
C3MRW WHW N/A
C3MRW WHFT
Specular Black
C3MRW BKW
C3MRW BKP
C3MRW BKFT
