Calculite
®
Incandescent Adjustable Accent
7052QD
Page 1 of 2
4 1/4” Aperture T4 Clear T. H. Framing Projector
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Thomas Company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Features
1. Housing:
Spun 16 ga. aluminum separates from frame for inspection
through aperture.
2. Lampholder:
Die-formed steel yoke with mini-can socket, 18 SF1 leads to
J-box.
3. Mounting Brackets:
Adjust vertically from inside of fixture. Durable 16 ga.
steel construction. Use with standard 3/4" or 1 1/2" lathing channels, or 1/2"
(11/16" O.D.) EMT pipe (by others) or Lightolier accessory mounting bars.
4. Face Plate:
Die-formed steel 20 ga. with integral cone, matte white baked
enamel.
5. Aperture Cone:
Designed to minimize glare and reduce brightness at ceiling
plane.
6. Molded Trim Ring:
Provides minimum width white flange in dry or plaster
ceiling.
7. Horizontal Locking Device:
Provides locking of horizontal rotation. Optical
assembly rotates up to 358°.
8. Mounting Frame:
Die-cast aluminum, suitable for dry or plaster ceilings.
9. Locking Device:
Allows removal of optical system for relamping without
disturbing shutter position.
10. Vertical Locking Device:
Locks optical assembly which may be adjusted
from 0° to 45°.
11. Focusing Lens:
System provides hard or softened edge image projection.
12. Shutters:
Four spring shutters with porcelain hand knobs allow for adjust-
ment by cut-off of edge of light beam. Internal clips hold 2" square or round
templates (included).
13. Junction Box:
14 ga. steel, 4" x 3" x 2" box allows inspection from below.
14. Thermal Protector:
Meets NEC and UL requirements. Insulation must be
kept 3" away from fixture sides and wiring compartments and must not be
placed above fixture in a manner which will entrap heat.
Accessories and Options
18" Mounting Bars
1950
(set of 2)
27" Mounting Bars
1951
(set of 2)
T-Bar Anchor Clips
1956
(set of 4, for 1950 & 1951 bars)
Wood Joist Mtg. Bars
7994
(set of 2)
Step Down Transformer 7997
(277V primary 1.1 amp/120V secondary,
300W capacity)
Electrical
UL Listed for maximum of 8 No. 12, 75°C through branch circuit supply conduc-
tors, or 60°C supply conductors for end of run.
Labels
UL Listed for damp locations, I.B.E.W.
Ceiling Cutout: 9 1/4” (235 mm) Dia.
Catalog Number
Lamp
7052QD
Matte White Finish
T-4
100W
Clear Tungsten Halogen, Mini-Can Base, 120V
7 7/8"
4 1/8: Dia
.
Aperture
9 15/16"
Overlap
1
2
3
4
5
6
7
8
9
10
11
12
13
9 3/16"
Flush
14
3"
1" min.-
1 7/8" max.
(Ceiling Runner)
3/4" max.
Ceiling
Thickness
Flush Trim
White Trim Ring
Top View
