CEILING APPEARANCE
AFTER PLASTER / COMPOUND
HAS BEEN APPLIED AND FLANGELESS TRIM
RING PLASTER SHIELD HAS BEEN REMOVED.
Fig. 4
FLANGELESS
TRIM RING LIP
Fig. 3
PLASTER / COMPOUND
PLASTER / COMPOUND
APPLICATION TOOL
PLASTER SHIELD
4. Apply plaster/compound to the ceiling (Fig 3). Starting at
the outside of the ring circumference, evenly build up the
plaster/compound around the entire RING LIP surface. It
is also acceptable to carefully apply plaster/compound over
the cardboard FLANGELESS TRIM RING PLASTER
SHIELD if preferred. Plaster/compound should be applied
so as to firmly secure FLANGELESS TRIM RING flush to
ceiling.
5. Feather the plaster/compound out away from the RING
until the transition is smooth and acceptable; multiple coats
may be required.
6. Sand away surface blemishes. For best results, sand
flat until the FLANGELESS TRIM RING plaster lip is
visible.
7. If cardboard FLANGELESS TRIM RING PLASTER
SHIELD is covered with plaster/compound, use a sharp
blade to carefully cut around inside circumference of
FLANGELESS TRIM RING and remove cardboard.
8. Paint as required, making sure to keep paint out of
Frame-In Kit.
A
COMPANY
631 Airport Road, Fall River, MA 02720
READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING LUMINAIRE
This luminaire is intended for installation in accordance with the National Electrical Code and local regulations.
To assure full compliance with local codes and regulations, check with your local electrical inspector before
installation. To prevent electric shock, turn off electricity at fuse box before proceeding.
Retain these instructions for maintenance reference.
IS: CA3FMR
INSTRUCTION SHEET NO.
Page 2 of 2
A1104
INSTALLATION PROCEDURE FOR CALCULITE
®
EVOLUTION:
CA3FMR SERIES FLANGELESS TRIM RING FOR FLANGELESS TRIMS
