READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE
This fixture is intended for installation in accordance with the National Electrical Code and local regulations. To
assure full compliance with local codes and regulations, check with your local electrical inspector before
installation. To prevent electric shock, turn off electricity at fuse box before proceeding.
Retain these instructions for maintenance reference.
INSTALLATION PROCEDURE FOR: EXPO ROD/TRIM KIT (CAT. NO. CAEXPT)
H.I.D. SURFACE CYLINDER
INSTRUCTION SHEET NO.
IS:C4CEX
A0604
Page 2 of 2
A
COMPANY
631 Airport Road, Fall River, MA 02720
NOTE: EXPO Rod/Trim Kit can be installed without detaching outer
glass.
STEP 1:
Install ROD into threaded hole in EXPO DECORATIVE
CYLINDER, repeat with the other two rods. Make sure rods are all
the way In.
STEP 2:
Align bottom end of RODS with holes in GLASS DISC,
position GLASS DISC onto the bottom lip of OUTER GLASS, then
secures with LOCK NUTS.
COMPLETED
EXPO
DECORATIVE CYLINDER
CAT. NO. C4CEX SERIES
RODS
GLASS DISC
LOCK NUTS
OUTER GLASS
