Lighting Systems
Baselyte-BSL4
Page of 7
Light T5 HO Direct/Indirect
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Company
www.lightolier.com
63 Airport Road, Fall River, MA 02720 • (508) 679-83 • Fax (508) 674-470
We reserve the right to change details of design, materials and finish.
© 2005 Genlyte Group LLC • 0205 Rev.
Ordering Information
Family
H
= T5 HO
6
= Direct/
Indirect
01
CN
H
6
BSL
CN
= Cutout
w/baffles
04
= 4’
08
= 8’
12
= 2’
1
= cct.
3
= cct.
w/EC/NL
5
= cct.
w/EM Battery
7
= cct.
w/Dimming
8
= cct. w/cct.
Thru wire
E
= Standard
<0% THD
F
= Standard
<0% THD
w/fusing
C
= Custom Color
W
= Standard
White
Distribution
Lamp Type
No. of Lamps
Housing
Module Length
Wiring
Voltage
Ballast
Finish
Weight = 3.0 lb./ft
01
= Light
Note:
Please
consult wiring
section of spec
sheets for more
wiring options.
Specifications
Features
. Housing: die-formed 20ga. cold rolled steel
2. End Set: die-cast metal with baked powder coat finish
3. Lamping: one T5 HO lamp
4. Configuration: 4’, 8’ and 2’ module lengths or continuous rows
5. Ballasts: electronic 20V or 277V
Finish
High-quality white powder coat with textured matte finish.
Custom colors available. Consult factory.
Mounting
Aircraft cable gripper is tamper-resistant and provides infinite vertical
adjustment capability. Aircraft cable, crimp and cable gripper independently
tested to meet stringent safety requirements.
Electrical
All luminaires are factory pre-wired to module ends with quick-wire
connectors.
Joints & Intersections
Self-aligning joining system with hands-free pre-joining wire access.
Labels
UL, CSA standards.
Individual Fixtures
. Determine the number of individual modules required
2. Order one end set per module
3. Order one non-power mount per module
4. Order one power mount per module
Continuous Rows*
. Determine run length
2. Order the appropriate number and length of modules for complete run
3. Order one end set for each run
4. Order one non-power mount for each module
5. Order one power mount per run
6. Order one joiner per module minus one (e.g. 3 modules requires 2 joiners)
*Note
: Some runs may require additional power mounts. Please see the
‘Run Configuration’ table on the next page for more details.
Ordering Instructions
D
= Dual 20V
& 277V
1
= 20V
2
= 277V
Note:
Option‘D’ is
standard. Voltage
options and 2 are
only available with
EM Battery and
Dimming wiring
options.
