LIGHTOLIER a GENLYTE company.
631 Airport Road, Fall River, MA 02720
(508) 679-8131 FAX (508) 647-4710
© 1995
7.
Position
Backplate
over
Crossbar
allowing
Crossbar Mounting
Screws
to come through
Holes
in
Backplate
. Secure
Backplate
in position by installing (2)
Battery Nuts
over
Crossbar Mounting
Screws
and tighten.
8.
If using
Auxiliary Mounting Knockout
, install the appropriate
hardware determined in step 3.
9.
Position
Screw
through
Loop
in
Safety Cable
and thread
Screw
into
Mounting Boss
on inside of
Lens Assembly
(Fig. 2).
10.
Install recommended lamp(s).
11.
Position
Lens Assembly
over
Backplate
making certain the
Safety Cable
does not interfere with the
Gasket
(fig. 1).
12.
Secure
Lens Assembly
in place by tightening the (2)
Mounting
Screws
on the face of
Lens Assembly
.
CAUTION
: Maximum wattage as marked on fixture must not
be exceeded.
WARNING
--(Risk of Fire) most dwellings built before 1985
have supply wire rated for 60° C. Consult a qualified
electrician before installing.
CAUTION
: For wet locations, in accordance with
Underwriters Laboratories requirements, a line of caulking
compound such as acrylic latex or silicone must be placed
around the perimeter of Backplate to seal water away from
the outlet box and back openings.
IS:4511
0995
Page 2 of 2
Instructions for Installation of Arco
Oval Series Fixtures.
Glass
Mounting Boss
Lens Assembly
Loop
Mounting
Screw
Safty
Cable
FIG. 2
Inside Lens Assembly
