Lightning Audio LA-1500BT Скачать руководство пользователя страница 10

Страница: 10 / 13

2SHUDWLRQ

Bluetooth

Pairing

1. Pairing

Turn on the

Bluetooth

mode of your mobile phone, then select the function for

Finding

Bluetooth

Device. After ﬁnding, it will show the name of

Bluetooth

Device “LIGHTNING AUDIO”; once found, select it and then it will asks you to input
a password/PIN. Input “0000” , then the LCD of the car audio system will display
CONNECT.

2. Disconnection

A) Using the mobile phone to disconnect

1) When connected, ﬁnd the paired

Bluetooth

device, then press the

disconnection button to disconnect.

B) When turning the unit on (after Acc of the car was switched off ), the unit will
search for a mobile phone, pair and connect. This will take about 10-15 seconds.

Note: When connected, the mobile phone transfers to the car audio player whenever
dialling takes place; the mobile phone transfers to the car audio player whenever
receiving a call.

3. Dialing options when connected

A) Dial with mobile phone directly.

B) To dial with remote control use the following procedures:

1) Brieﬂy press SEND button.

2) Input telephone number with number buttons 0-9.

3) Brieﬂy press END button to cancel the incorrectly entered number, if necessary.

4) Brieﬂy press SEND to start dialing. The talking time will appear on LCD if
dialling is successful and is received.

C) Redial - Press SEND button on remote control twice, it will show DIALING on
LCD and dial the number. After dialing is completed, talk time will display.

4. Accept/ Reject/ End Call

A) To accept the call, press the SEND button.

B) To reject the call, press the END button.

C) To end the call, press the END button.

Note: When call is ringing, CALLING appears along with then the phone number.
While talking, talk time appears.

5. Talking volume level setting

While talking, use volume control to adjust volume level. This volume level can
not be saved.

6. To transfer the audio of a ﬁle played by the Mobile Phone to the Car
Audio Player

If the mobile phone supports A2DP and is capable of playing audio ﬁles; when
the Mobile Phone plays an audio ﬁle, the playback will be transferred to the Car
Audio Player (For some Mobile Phones, you must ﬁrst select Play by

Bluetooth

In A2DP mode, if the

Bluetooth

device of the Mobile Phone supports AVRCP, the

functions of the

>>|

|<<

and PLAY/PAUSE buttons are the same as in media mode

(no fast forward/backward functions for the

>>|

|<<

buttons). The other buttons

normally available in media mode are not available.

Android App (LA-1500BT & LA-2300BT)

Another way to control the unit instead of using the included remote, you can use
your Android phone. You will need to install the “RadioView” app onto your mobile
device. The app will need to be downloaded from Google Play. Do a search for
“RadioView” and proceed to download. Install per the app instructions.

Remote Control

Load/unloading battery of remote control

Please remove insulating sheet out of remote control before use. Pull out
insulating sheet in the direction as per Fig. 1.

When changing battery for remote control, ﬁrst pull the movable block hold in
the direction as indicated in Fig. 2, Arrow A. Then pull the battery holder out
from the remote control in the direction as indicated in Fig.2, Arrow B.

Replace the old battery by a new battery with (+) polarity side upward. Then
return the battery holder to the remote control by pressing the battery holder.
Please see Fig.3.

Improper use of battery may cause overheating or
explosion. Which may result injury or ﬁre.

Battery leakage may cause damage to the remote
control(Battery Life: 6 months with normal use in
normal room temperature).

Do not short the battery.

Do not throw the battery into the ﬁre.

To avoid the risk of accident, keep the battery out of reach of children.

+ Side Up

Fig. 1

Fig. 2

Fig. 3

CLK

SEL

POWER