9
Operation
To search for a radio station manually or automatically
Press and hold the
>>|
button to activate MANUAL searching mode.
In MANUAL mode: Press the
>>|
or
|<<
button briefly to manual tune up/down
for the desired radio station frequency step by step.
In AUTO mode: Press the
>>|
or
|<<
button, to automatically tune up/down for the
radio station frequency. (If in MANUAL mode and without further operation, the
unit will change to AUTO mode a few seconds later.)
To store current station or turn on a preset one
1) Press one of the 6 number buttons and hold for more than 1 second to store
the current station in the preset memory bank of the number button for the current
band. In this way the unit can store 30 preset stations.
2) Press one of the 6 number buttons briefly to turn on the preset station stored in
the preset memory bank of the number button for the current band.
3). To scan for each preset station or auto search for the strongest stations
1) When pressing and holding the APS button for more than 1 second, the radio
searches from the current frequency and checks the signal strength level until
the 6 strongest stations are found. And then the 6 strongest stations are preset
to the corresponding preset memory numbered bank. The auto-storage operation
is implemented in the each selected band. When the auto-storage operation is
finished, the radio executes Preset scan.
2) When pressing the APS button or A.P button briefly, the radio searches for each
preset station in the current band and holds at that preset station for 5 seconds,
and then searches again.
4. To search for stations with a PTY (PROGRAMTYPE) program (RDS only)
Press and hold PTY/MODE on main unit to select one of PTY programs such as:
POP M- - NEWS-- off. While selecting POP M or NEWS, pressing one of the 6
preset buttons briefly and repeatedly can select your desired PTY program as
described in preset buttons. When turning on a PTY program, the PTY program
and PTY word is flashed on LCD. After selecting a desired PTY program and no
operation for 2 seconds, it will search for the station of the PTY program. During 1
loop, if the desired station of the PTY programs not found, PTY NONE is displayed,
then returns to previous normal radio and PTY icon disappears.
* When PTY mode is on, the 6 number buttons are shared as follows:
PTY music group -------------------------- PTY speech group
1. POP M, ROCK M
1. NEWS, AFFAIRS, INFO
2. EASY M, LIGHT M
2. SPORT, EDUCATE, DRAMA
3. CLASSICS, OTHER M
3. CULTURE, SCIENCE, VARIED
4. JAZZ, COUNTRY
4. WEATHER, FINANCE, CHILDREN
5. NATION M, OLDIES
5. SOCIAL, RELIGION, PHONE IN
6. FOLK M
6. TRAVEL, LEISURE, DOCUMENT
AF [ALTERNATIVE FREQUENCIES] mode
When pressed briefly, AF switching mode is selected and the state of AF switching
mode is displayed by AF segment in display.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS information.
Segment flashing: AF switching mode on, but RDS information is not received yet.
When AF switching mode is selected, the radio checks the signal strength of AF all
the time. The interval of checking time of each AFs depends on the signal strength
of the current station, from a few minutes for strong station to a few seconds for
a weak station. Every time that a new AF is stronger than the current station, it
switches over to that frequency for a very short time, and the NEW FREQUENCY is
displayed for 1-2 seconds. Because the mute time of AF switching or checking time
is very short, it is almost inaudible in case of normal program. During FM mode,
when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only receive and save
RDS program.
TA [TRAFFIC ANNOUNCEMENT] mode
When TA mode is on (TA is displayed on LCD), it will begin to seek TA station and
TA SEEK will be displayed on LCD.
When traffic announcement is transmitted:
1). If the unit is in SD, USB mode, it will switch to radio mode temporarily.
2). If volume level is below 20, volume level is raised to 20, and returns to its
previous mode and volume level when the traffic announcement is over. If volume
is adjusted during traffic announcement, only the traffic announcement volume is
valid.
* When TA mode is on, SEEK, AUTO MEMORY function can be received or saved
only when traffic program identification code has been received.
USB/Card OPERATION:
1. To insert or pull out SD card or USB stick
When needing to playback SD or USB music, remove front control panel or open
the cover of USB port, insert SD card or USB stick into SD slot or USB port. Then
the playing mode will be changed into SD or USB mode and display Card or USB
on LCD (When SD card and USB stick are both inserted into their slot or port, the
playing mode will be changed into the mode of the latter one), and then play the
first track of SD or USB.
2. To select next or previous track to play
Press the
>>|
button briefly to play next track.
Press the
|<<
button briefly to play the current track from the beginning of it if the
playing time is more than 2 seconds.
Press the
|<<
button briefly to play the previous track if the playing time is less
than 2 seconds.
3. To play fast forward or reverse
Press and hold
>>|
or
|<<
button to play fast forward or reverse.
4. To play previous or next 10th track
Press 5/-10 or 6/+10 button to play previous or next 10th track.
5. How to use 1/
>||
/TOP button
During playback, press 1/
>||
/TOP button to pause playback. When in pause mode,
press 1/
>||
/TOP button to play again.
Press and hold 1/
>||
TOP button to select the first track for playback.
6. To scan tracks
During playback, press INT button briefly to play the first 10 seconds of each track,
press INT button again to cancel INT function and retain playing the track currently
selected.
7. To repeat track(s)
During playback, press RPT button briefly to play the current track repeatedly, and
the LCD will display RPT ONE.
Press and hold the RPT button to play the tracks in the Album repeatedly, and the
LCD will display D-RPT.
Press RPT button again to cancel RPT function, and the LCD will display RPT OFF.
8. To play tracks in random
During playback, press RDM button briefly to play all tracks in random. Press it
again to cancel RDM function.
