Lightmed LIGHTLas SLT Deux-V Скачать руководство пользователя страница 4

Страница: 4 / 4

YAG & SLT Laser Settings

12a

12b

Magnification Changer

Turn knob to desired magnification.

Switch from YAG to SLT Mode
Offset (YAG mode only)

Turn dial to adjust the offset. Make sure the dial says + FOR

POSTERIOR OFFSET, or - FOR ANTERIOR OFFSET. This ranges

from -500 to +500.

12a - YAG Energy Setting

Turn to adjust for YAG energy setting.

12b - SLT Energy Setting

Turn to adjust for SLT energy setting.

Energy Reading

View your adjusted parameters here.

Test Button

Fires the laser while keeping the shutter closed. Safest way to

check laser output energy.

Set Button

Changes the laser from Standby to Treat mode. Push once

desired parameters are set.

Set Pulse

Change pulses from 1, 2, or 3 pulses per laser shot.

Total Counter

Top shows total number of shots. Bottom shows total energy

used. Record values after procedure.

Reset

Resets the counter.

Содержание LIGHTLas SLT Deux-V

Страница 1: ...LIGHTLas SLT Deux V QUICK START GUIDE SLT YAG COMBINATION SYSTEM with Vitreolysis ...

Страница 2: ...table on first with the on switch Step 2 Adjust Table Height Make sure the green light is ON Adjust the height using the UP and DOWN arrows Step 3 Unlock the Emergency Switch Turn switch counter clockwise until it pops out Nothing will turn on until switch is unlocked Step 4 Turn on Slit Lamp Turn the key to turn on the Slit Lamp ...

Страница 3: ...dden boost of illumination during treatment Step 7 Illumination Intensity Turn knob to graudally adjust the intensity of illumination Step 8 Adjust Arm Rest Height Turn black knob to loosen hold on arm rest Adjust height for comfort and tighten Move arm rest to opposite side using the hole in table or remove arm rest entirely ...