Cube Hazer 600 USER MANUAL
Please read these instructions carefully before use
.
This appliance is not intended for use by persons(including children)with reduced
physical,sensory or mental capabilities,or lack of experience and knowledge,unless they
have been biven superiion or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with appliance.
If the supply cord is damaged,it must be replaced by the manufacturer,its service agent or
similarly qualified persons in
order to avoid a hazard.
It is a kind of intelligent haze, which is widely applied to disco bars, theaters. To make sure of a long lifetime and good use of this
haze machine, we strongly suggest you read this work manual before operation.
•
Parameters
1
•
Rating Voltage:
AC100~120V/7A
€
AC200~240V/4A
2
•
Heater power consumption: 600W
3
•
Warm-up Time:1’30”
4
•
Haze last time: Min 30 seconds
5
•
Control Mode: Manual or DMX console
6
•
Haze Output:0~8000CUFT/MIN
7
•
Dimension: L280XW260XH320MM
8
•
Net Weight :6.5KG
•
Operations
This haze unit is with Manual control, DMX control, Master-slave and over-heat protection function.
1
•
Manual control
* On receipt of this unit with packing intact, please open the carton and check the products unit ,especially the front nozzle ,
please make sure the front nozzle is not stiffened, check whether the haze machine is intact or whether all listed accessory
are in the carton, if any parts missing, please contact your distributor.
* Please place the haze on flat ground, open the tank cap and fill with the fog fluid just below the top of the tank window on the
side of the unit. ALWAYS TAKE CARE NOT TO OVERFILL.
* Please plug the remote control into the backward socket which marked REMOTE CONTROL.
