9
Warning! Verify that the voltage select switch on your unit matches the line
voltage applied. Damage to your fixture may result if the line voltage applied
does not match the voltage indicated on the voltage selector switch. All fixtures
must be connected to circuits with a suitable Earth ground.
1. Preface
1.1 Packing list
Product name
quantity
Mini moving head Light
1 pcs
Power -line
1 base
User Manual
1pcs
1.2 Unpacking ins truc tions
Once receiving a fixture, carefully unpack the carton, check the contents to ensure that all
parts are presented, and have been received in a good condition. Notify the shipper
immediately and retain packing material for inspection if any parts appear damaged from
shipping or the carton itself shows, sign of mishandling. Save the carton and all packing
materials. In the event that a fixture must be returned to the factory, it is important that the
fixture be returned in the original factory box and packing.
1.3 AC Power
To determine the power requirements for a particular fixture, see the label affixed to the back
plate of the fixture or refer to the fixtures specifications chart. A fixture listed current rating is
its average current draw under normal conditions. All fixtures must be directly powered off a
switched circuit and cannot be run off a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer source voltage matches the fixtures requirement. Check the fixture or
device carefully to make sure that if a voltage selection switch exists that it sets to the correct
line voltage you will use.
