10
Universal DMX Operation (DMX mode)
This mode allows you to use universal DMX-512 console to operate.
1.
Install the units in a suitable position.
2.
Use standard XLR cable to connect your units together via the XLR connector on the rear of the units. For longer
cable we suggest a terminator at the last fixture.
3.
Assign a DMX address to each the unit using dipswitches.
4.
Turn on all units. Use DMX console to control your units.
Instruction for DMX channels
CH
1
Mode select
0~63
LASER OFF
64~127
Auto mode
128~19
1
Sound active mode
192~25
5
DMX mode (CH2~CH8 valid)
CH
2
Pattern
select
0~255
Selecting built-in patterns
CH
3
Zooming
0~127
Manual adjust the pattern size
128~25
5
Loop zooming in or out
CH
4
X axis rolling
0~127
Manual rolling
128~25
5
Choose the rolling speed
DMX signal
