2. Bring mains/control cables using terminal blocks and junction box (not included in luminaire's
delivery set). Cable connection sholuld be done with appropriate polarity: "L1" - phase, "N" -
neutral.
3. Seal cable entry in the junction box (with special flanges and silicone).
4. Connect 24 V from power supply B (control gear) (not included) to the luminaire with cable and
sealed connectors C (not included) or sealed junction boxes, lock the connections made.
5. Interconnect luminaries in a line with terminals block (line's length is limited by 1.0 мм2 wiring
cross-section and overall power of the line), lock the joints, place the plug (D) at the end of the
line, or seal the cable.
6. Set the luminaire in desired position with pivoting brackets and lock it with screws.
These instructions assume expert knowledge corresponding to a completed professional
education as an electrician.
Overall and installation dimensions, mm
1.
CONNECTION SCHEMES
1. Mains connection scheme.
WARRANTY
- The manufacturer shall repair or replace a luminaire that has been found to be defective under
normal use through no fault of the customer, subject to the installation instructions having been
followed, during the warranty period.
- The luminaire is a serviceable device. When installing the luminaire, free access should be
provided for service or repair. The manufacturer is not responsible and will not compensate any
expenses related to construction work, rental vehicles etc in case the repair site is not readily
accessible.
- Warranty period - 36 months from date of luminaire delivery.
- Warranty does not apply to color change of painted surfaces and plastic parts during luminaire
operation.
- Warranty period of emergency power supply units (supplied with rechargeable battery) and
illumination control system components (supplied without luminaires) is 12 (twelve) months
from date of delivery.
- Luminous flux level is at least 70% of the nominal value during the warranty period.
- Warranty will cover the entire period, given that assembly, installation and operation of
luminaires are handled by specialized technical personnel and according to the luminaire's
manual.
15