HEALTHE BY LIGHTING SCIENCE | 3905 W EAU GALLIE BLVD, SUITE 101, MELBOURNE, FL 32941 | 877.999.5742 | HEALTHELIGHTING.COM
COMMISSIONING AND SETUP WITH SUNTRAC PRO APP
1. Open the SunTrac Pro App. If you do not have the App, please download it from the
Apple App Store.
2. Once the App is open, apply power to the Cleanse Troffer.
3. Start pairing process by selecting "LINK" on the App. A scan will be performed and
the "Cleanse" Troffer will appear on the list (Fig 1). If device is not found, select
"RESCAN" to repeat scan for new device.
4. Select Cleanse from LINK list and follow the remaining App instructions until
pairing is complete. Once pairing is complete,, it will appear LINKED with access to
advanced controls (Fig 2).
5. Once paired, select "About" to verify latest firmware is installed. Select "Update" to
update the firmware if available. Note: "Update" button will only be enabled if a new
firmware is available.
6. For sanitization and illumination control, select "Cleanse Control" and adjust to
desired settings (Fig 3).
Fig 1
Fig 3
Fig 2