11
Mechanical Specification
4
ADDR
- DMX Address Setting viacontrol board and moter sstting
1. Tap the UP button or DOWN button until “ADDR” is displayed, press ENTER
2. “Axxx” will now be displayed, “x” represents the displayed address. Press the UP or DOWN buttons to find your
desired address.
CHND
- This menu will let you select your desired DMX Channel mode.
1. Tap the UP button or DOWN button until “
CHND
” is displayed, press ENTER.
2. “X Ch” will now be displayed, “X” represents the displayed DMX channel mode. Press the UP or DOWN buttons
to find your desired Channel mode.
SLAV
- This menu will let you select your desired Master/slave mode
1.Tap the UP button or DOWN button until “SLAV” is displayed, press ENTER.
2. “Sla” will now be displayed,Slave mode is confirmed.It will be slaved by auto mode sound mode and chase mode
STAT
- This menu will let you select your desired static color mode and strobe mode
1. Tap the UP button or DOWN button until “STAT” is displayed, press ENTER.
2. There will be five options. Press ENTER can select the option and press UP or DOWN button can
select the value you desire as below.
1) red~R000~R255
2) gree~G000~G255
3) blue~B000~B255
4) white~W000~W255
5) strobe~ST00~ST20
COLO
- Build-in color mix
1. Tap the UP button or DOWN button until “COLO” is displayed, press ENTER.
2. “CoX” will now be displayed, “X” representing a number between 1-69 will be displayed. Press the UP or DOWN
buttons to select either a static color mode.
AUTO
- This menu will let you select your desired auto mode
1. Tap the UP button or DOWN button until “AUTO” is displayed, press ENTER.
2. “Autx” will now be displayed, You can confirm three modes by UP or DOWN for auto mode.
SOUD
- This menu will let you select your desired sound mode
1. Tap the UP button or DOWN button until “SOUD” is displayed, press ENTER.
2. “SOUD No.x” will now be displayed, You can confirm three modes by UP or DOWN for sound mode. “SOUDX
SENSX” will display the Sensitivity of sound
REMO
- This menu will let you select your desired remo mode
1. Tap the UP button or DOWN button until “REMO” is displayed, press ENTER.
2. “on” or “off” will now be displayed, you can select to close or open the infrared.
REST
- This will display the System all value Reset
1. Press the UP or DOWN button until "REST" is dispalyed, press ENTER.
2. The software version will be displayed.
INFO
-This menu will display the light information
1. Tap the UP button or DOWN button until "INFO" is displayed ,press ENTER.
1) TEMP this will display the temperature at work
2) TIME this will display the light operating time
DISP
-This menu will display the time of display panel
1. Tap the UP button or DOWN button until "DISP" is displayed ,press ENTER.
2. “on” or “off” will now be displayed, if you select "ON" means after 20 seconds the display panel will destroy,if you
select "OFF" means the display panel will always display.
360º
1061mm
163mm
140mm
Содержание PIXEL-BAR 12 RGBW
Страница 1: ......