The
NOVA 10 Watt CREE Rechargeable Spotlight
Your new cordless, Lighthouse rechargeable Spotlight is perfect for use in and around the
home and garage, providing a safe and portable source of light for use just where and when
you need it. Great for use during power failures, while camping, fishing or working on the car
and many other uses including roadside emergencies with its flashing Red LED function.
Using the AC Charging Adapter
1) Ensure that the Spotlights power switch is in
the off position
2) Plug the adaptors jack plug into the recharge
socket on the side of the torch
3) Plug the adaptor into a 240V socket and switch
the socket on (if applicable).
4) The charging indicator lamp will glow RED
while charging is in progress
5) The battery will be fully charged after
approximately 16-20 hours, once charged
switch off the wall socket or unplug the adaptor
and disconnect the jack plug from the torch.
(Do not exceed 24 hours on a charging cycle as
this may damage the battery)
Safety Precautions
Use 240v AC charging adaptor indoors in a dry
location only. Exposure to damp or wet
conditions could cause electrocution or damage
to adaptor.
Do not use the charger in the vicinity of
flammable liquids or materials.
Do not use the charging adapter in combination
with any extension cord, electrical generators, or
step-up transformers.
Always plug the adaptor directly into a 240v
outlet in a suitable location.
Store in dry location and do not allow the
charging adaptor to come in contact with water,
rain or snow. If the charging adaptor comes into
contact with water, place in a dry location at
room temperature, on a soft absorbent towel
and allow too dry thoroughly.
Do not operate the unit until it is completely free
of moisture.
If the adaptor becomes submerged in water,
discontinue use immediately and contact your
local LIGHTHOUSE retailer for a replacement
charger unit.
Do not store charging adaptor where
temperatures may exceed 122°F (50°C).
Use only the AC charging adaptor supplied with
the torch. Do not attempt to charge the torch
with an adaptor that is not compatible as this
could result in a fire, damage to the torch or
personal injury.
240V AC Mains
Charging Adaptor
12V DC Car
Charging Adaptor
Using the 12V DC Charging Adapter
1) Ensure that the Spotlights power switch is in
the off position
2) Plug the adapters jack plug into the recharge
socket on the side of the torch
3) Plug the adapter into the vehicles 12v DC
cigarette lighter or accessory power socket.
4) The charging indicator lamp will glow RED
while charging is in progress.
5) Disconnect the jack plug from the torch, and
remove the DC adapter from the outlet socket.
The battery will be fully charged after
approximately 8-10 hours, Disconnect the jack
plug from the torch, remove the DC adapter
from the outlet socket.
(Do not exceed 12 hours on a charging cycle as
this may damage the battery)
Safety Precautions
The DC charging adapter can be used in most
vehicles by plugging into the 12v DC cigarette
lighter or accessory power socket.
Consult your vehicle owner's manual for further
information on operating 12v DC accessories.
Do not drive the vehicle while charging, as an
unsecured torch may be a hazard during certain
driving manoeuvres.
Store in dry location and do not allow the
charging adapter to come in contact with water,
rain or snow.
If the charging adapter comes into contact with
water, place in a dry location at room
temperature, on a soft absorbent towel and
allow too dry thoroughly. Do not operate the unit
until it is completely free of moisture.
If the adaptor becomes submerged in water,
discontinue use immediately and contact your
local LIGHTHOUSE retailer for a replacement
charging adapter.
Do not store charging adapter where
temperatures may exceed 122°F (50°C).
Use only the DC charging adapter supplied with
the torch. Do not attempt to charge the torch
with an adapter that is not compatible as this
could result in a fire, damage to the torch or
personal injury.
Operating the Spotlight:
Main beam
Depress the switch to either the
–
position for a
Low output or the
=
to select the high output option.
Flashing Red LEDs
Depress the switch at the rear of the torch marked
warning blinker to engage the flashing LED
function. This function can be used independently
or in conjunction with all other modes.
USB Charging output
Depress the switch at the rear of the torch marked
USB on/off. The red indicator lamp beside the
charger input jack will light to show that the USB
socket is live and ready for use. This function can
be used independently or in conjunction with all
other modes.
Charging the Spotlight
The Spotlight must be fully charged before being used for the first time. This will ensure that
the battery gives its best performance now and on future re-charging cycles. The AC and DC
charging adapters are for re-charging the battery only. They cannot be used to directly power
the torch. Always ensure the torch is switched off whilst charging.
Torch Specifications:
Battery Pack:
3.7V 3.6 Ah Li-ion Internal
Rechargeable Battery
Bulb Type:
1 x 10W CREE LED
+ 12 Red LEDs
LED Bulb Life:
100,000 Hours
Charging:
USB Output Function
Charger Specifications:
Model No:
YH-BS350900200D
Voltage:
230~240V AC 50Hz
Secondary:
9V DC 200mA