“Riviera” LightHeaded™ Bed
Assembly Instructions
www.LightHeadedBeds.com
Model #20204Twin size, Cheshire Cherry
Model #20321Twin size, Black
Model #20324 Twin size, White
9/17/2015
1168344 B
Step 6
Rollout wooden slats (EPT) onto your side rails so that
the two end slats lock into place with the wood blocks
near the headboard and footboard.
Step 7
Secure each slat into the side rails with the wood screws (EPM) using a
Phillips head screwdriver (not included).
You have now completed the bed assembly.
Page 4
Your LightHeaded Bed comes with a built-in image
storage on the inside of your footboard. This
specially designed area allows you to organize and
safely store up to 25 interchangeable LightHeaded
graphic images.
Please refer to the Lighting Assembly Instructions in
your TechBox. Locate the page titled Using Your
LightHeaded Bed to easily remove one graphic
image and replace it with another.
Place the image which you just removed from the
Headboard into the storage area in the Footboard
and your image will be ready for the next time you
want to personalize your LightHeaded Bed.
On the back of your LightHeaded headboard, located just below
the hinged top, is an On/Off switch which can be used to toggle
the light component on or off. Please refer to your user manual
in the TechBox for additional information.
Display in your headboard. Store in your footboard.
On/Off switch
Light component positioning hole
If, after review of the Lighting Assembly Instructions contained in the
TechBox, you find that your LightHeaded™ Image does not slide in
and out of the headboard with little to no resistance, we’ve provided
a 1" diameter hole located in the center of the headboard back panel.
With your finger, simply apply gentle pressure to the back of the light
component to reposition it, and your LightHeaded™ Image will slide
effortlessly in and out of your headboard.
EPT
EPM
EPM
