5
5
ELECTRICAL CONNECTIONS
The HTX2 Hybrid Driving Light is fitted with a waterproof 4 pin electrical connector.
The mating connector included in the kit is fitted with short lengths of cable for integration with an appropriate
wiring harness.
NOTE:
Harness must be capable of 15A per light.
If the vehicle’s existing wiring harness is suitable, the included connector needs to be fitted directly to your
existing driving light circuit.
CONNECTOR WIRE COLOUR IDENTIFICATION
1.
Red:
Positive input for HID – connect to positive output (87) wire on relay
2.
Black:
Negative for HID - connect to negative (earth)
3.
Yellow:
Positive input for LED - connect to positive output (87) wire on second relay
4.
Blue:
Negative for LED - connect to negative (earth).
Blue
Yellow
Red
Black
NOTE
For maximum performance, three mode operation and safety we recommend the use of the optional
wiring harness (part number LFDLHDS) to fit the 12V version of the HTX2 to a vehicle – for fitment follow
the installation instructions included with the harness.
The 24V version of the HTX2 is commonly installed on various commercial vehicles and the use of a
customised harness is usually required.
Once all the electrical connections have been made, align the light to the desired position and tighten all
bolts as per recommended torque specifications (see specifications section).
CAUTION
Improper installation of the connector will affect the reliability and operation of your lights.
