B Correctly install battery into camera as indicated by +/- symbols and direction
of arrows marked on battery until it’s in place.
C Battery Gauge: Please refer to diagram.
D
Remove Battery: Open cap to take battery out.
3.
Charging
A
Charging can be done by either connecting LD4000 to computer or power
adaptor.
B Charge LD4000 on vehicle by connecting it to car charger.
C LD4000 can record video while charging
(Switch into Vehicle-mounted Mode in
“Menu”
）
D Charging of LD4000 can be done even when it’s powered off.
4.
Switching camera on and off
A Press and hold power switch for 3 to 5 seconds to turn it on / off.
B Switch it on and off by turning display screen on and off.
5.
Mode Switching
Switch between video recording / photo shooting / playback / menu by pressing “Power
On-Off” button.
recording mode, while
photo shooting mode. Symbols are displayed
on top of screen.
Refers to the function of video playback, and the last one is system
settings.
6.
How to record videos and configure recording setting
1. Video Recording
Switch to recording mode and there’ll be an
icon in the upper left corner
of the screen. Press OK to start recording and the
icon in the upper left
corner will start to flash. Press “OK” again if you want to stop and the
icon will disappear.
2. Photo shooting & Settings
Switch the camera on and press “Mode” to select “Photo shooting Mode”, there’ll
be an
icon in the upper left corner of display screen and the camera is in
photo shooting mode. Press “OK” to take photos.
Shooting Pattern: Single shot / Self-timer (2s/5s/10s) / Continuous Shooting
3. File Storage & Playing
After you are done recording, use a USB cable to export the videos onto a
computer to play. Or you can take the Micro SD card out and access the image
data with a card reader.
